Kockney Koi Solvent Weld Outer Stepped Hosetail - 12-40mm
Best current price£2.09from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£2.09Visit shop Kockney Koi Solvent Weld Outer Stepped Hosetail | Pond Pipe Fitting
Visit shopeBay£2.09Visit shop All Offers
3 offers from £2.09 - £9.99
View price history by clicking the chart icon.
eBayKockney Koi Solvent Weld Outer Stepped Hosetail | Pond Pipe Fitting
£3.99 delivery
£2.09
Visit shop
www.pond-planet.co.ukKockney Koi Solvent Weld Outer Stepped Hosetail
£0.02 delivery
£2.09
Visit shop
Product Information
Full details
The Kockney Koi Solvent Weld Outer Stepped Hosetail (12-40mm) is designed for pond enthusiasts and professionals who need a reliable, permanent transition from flexible hose to rigid PVC pipework. It is ideal for creating custom plumbing configurations in filtration systems, though it requires permanent bonding with solvent cement, meaning it is not suitable for temporary setups that may need frequent adjustment.
All features
| Model Part Number | 002630 |
|---|---|
| Brand | Kockney Koi |
Extended Product Information
FAQs
Can I use this for non-pond applications?
While designed for pond filtration, it can be used in other low-pressure fluid transfer systems involving standard flexible PVC hoses and rigid pipework.
What size rigid pipe does this fit into?
This component is specifically designed to fit inside standard 40mm solvent weld PVC pipe fittings.
Is it possible to remove the hosetail once glued?
No, solvent welding fuses the plastic together, creating a permanent bond. You would need to cut the pipework to remove or replace the fitting.
Does it include the solvent cement?
No, solvent cement must be purchased separately. Use a reputable brand of PVC solvent weld adhesive.
Will this handle high-pressure water pumps?
It is designed for standard pond pump pressure. Ensure all joints are properly cured to handle the force of your specific pump system.
Troubleshooting
Joint is leaking after installation.
This is often due to insufficient solvent cement or debris during the bonding process. Ensure the surfaces were sanded lightly and cleaned with a PVC cleaner before applying fresh cement.
Hose slips off the hosetail barb.
The hose must be secured with a stainless steel jubilee clip (hose clip). Ensure the clip is placed behind the barb ridge to prevent slipping.
Pros and Cons
Pros
- Seamlessly bridges the gap between flexible hose and rigid PVC piping
- Multi-step design accommodates five different hose sizes
- Creates a permanent, secure connection that won't vibrate loose
- High-quality construction suitable for intensive pond filtration use
Cons
- Requires permanent solvent welding, preventing easy disassembly
- Not suitable for locations where future plumbing changes are needed
- Requires proper application of solvent cement to ensure a leak-proof seal
Setup, Compatibility & Care
- Preparation: Ensure both the outer surface of the hosetail and the inner surface of the 40mm fitting are clean, dry, and free of dust or oils.
- Bonding: Apply a thin, even coat of high-quality solvent weld cement to both mating surfaces.
- Insertion: Firmly press the hosetail into the 40mm fitting and hold for 30 seconds to allow the initial bond to set.
- Curing: Allow the joint to cure fully for at least 24 hours before introducing water pressure to ensure a structural, leak-free connection.
- Maintenance: Periodically check the hose clips on the barb side to ensure the flexible hose remains securely seated over time.