Fischer Countersunk Hammer Fixing - Grey

These fixings are suitable for brick, concrete, blockwork, and stone.

You will need a 5 mm drill bit.

The maximum panel thickness is 2.5 cm.

These are primarily designed for indoor use. Avoid use in damp or corrosive environments.

Use a PZ2 screwdriver.

The length of the fixing is 50 mm.

There are 20 fixings per pack.

Removing the fixing is generally not recommended as it will damage the hole. If removal is necessary, you can try to unscrew the screw and pull the fixing out.

Ensure the correct drill bit size (5 mm) was used. Check the material compatibility and the weight of the attached item.

Ensure the hole is clear of debris. Try a new fixing if the screw is damaged. Do not overtighten.

The hole may be too large. Try using a larger fixing or filling the hole with an appropriate filler before re-installing.