Best current price£6.00from Debenhams
Shopping.co.uk recommended and popular offers
Debenhams£6.00Visit shop Valuelights Unisex White Downlight Fire Rated Ceiling Light Fitting Single Pack In
Visit shop90 offers from £6.00 - £69.99
View price history by clicking the chart icon.
This guide is for homeowners and electricians looking for a reliable, mains-powered downlight solution. The ValueLights Downlight Fire Rated Ceiling Light Fitting offers a bulk pack of 20 quality fittings, simplifying installation with integrated components and eliminating the need for a transformer. A key benefit is the 60-minute fire rating for added safety. While versatile for halogen or LED bulbs, users should note that bulbs are sold separately.
| Colour | White |
|---|---|
| Model Part Number | 5016529067139 |
| Brand | ValueLights |
No, these downlights are designed to be wired directly to the mains voltage, so no separate transformer is required.
You can use either regular halogen GU10 bulbs or energy-efficient LED GU10 bulbs. Please check the maximum wattage rating specified on the product for halogen bulbs.
No, the bulbs are not included and must be purchased separately.
The 60-minute fire rating means the fitting is designed to help maintain the integrity of the ceiling in the event of a fire for up to 60 minutes, contributing to fire safety by slowing the spread of flames and smoke.
The metal spring clips are attached to the body of the downlight fitting. Once the fitting is inserted into the ceiling cut-out, these spring clips push outwards, holding the fitting securely in place against the ceiling surface.
While they have a fire rating, their suitability for specific zones in bathrooms (e.g., near water sources) depends on IP rating, which is not specified here. For bathroom installations, always consult local building regulations and ensure the fixture has an appropriate IP rating for the intended zone.
Warranty information is typically provided by the retailer or manufacturer. Please refer to your purchase documentation or the ValueLights website for specific warranty details.
Check that the mains power is switched on at the circuit breaker. Verify all wire connections at the terminal block are secure and correct. Ensure the GU10 bulb is correctly seated and functional (try a known working bulb).
This can be caused by a loose bulb or poor connection. Turn off power, remove and reinsert the bulb firmly. Check terminal block connections. If using a dimmer switch, ensure compatibility with LED bulbs if LED bulbs are installed.
Ensure you are not exceeding the maximum wattage rating for halogen bulbs. If using LED bulbs, check their heat output, as some can still get warm. Ensure there is adequate ventilation around the fitting if possible, especially if installed in a confined space.
Setup:
Compatibility:
Care:
