Lancaster Corner TV Unit - Grey

Setup

1. Unpack and Inspect: Carefully unpack all components and hardware. Compare against the parts list in the instruction manual to ensure everything is present and undamaged.
2. Prepare Your Space: Choose a clear, flat area for assembly, preferably near the intended final location. Lay down a blanket or cardboard to prevent scratches.
3. Follow Instructions: Assemble the unit step-by-step using the provided manual. Pay close attention to diagrams for correct orientation of panels and hardware.
4. Secure All Connections: Ensure all screws, cam locks, and dowels are fully tightened for stability. Do not overtighten, which can strip screws or damage the material.
5. Drawer Assembly: Carefully assemble the drawers and install the metal runners according to the instructions. Test drawers for smooth operation before placing items inside.

Compatibility

• Corner Placement: This unit is specifically designed for corner spaces, fitting flush against two walls. Its triangular footprint makes it less suitable for flat wall placement where gaps would appear.
• TV Size: The top surface is designed to accommodate most flat-screen TVs. Ensure your TV's base fits within the dimensions of the unit's top and that its weight does not exceed the unit's capacity. Info needed: [Max TV weight capacity and top surface dimensions]
• Media Devices: The open shelf is suitable for standard-sized media devices. Measure your devices (e.g., soundbar, receiver, console) to ensure they fit within the shelf dimensions. Info needed: [Shelf dimensions]

Care

• Cleaning: Wipe surfaces regularly with a soft, damp cloth. For more stubborn marks, a mild soap solution can be used, followed by drying with a clean, dry cloth. Avoid abrasive cleaners, harsh chemicals, or solvents, which can damage the finish.
• Protection: Use coasters or mats under drinks or hot items placed on the oak veneer top to prevent stains and heat damage.
• Maintenance: Periodically check all hardware connections (screws, bolts) and tighten if necessary to maintain stability. Keep the unit away from direct sunlight and extreme temperature changes to prevent warping or fading.