Best current price£16.83from The Range
Shopping.co.uk recommended and popular offers
The Range£16.83Visit shop Jcp Construction Products Shield Anchors Shield Only Zyp - M10 X 60 (Box Of 50) - White
Visit shop5 offers from £16.83 - £18.82
View price history by clicking the chart icon.
The JCP CONSTRUCTION PRODUCTS Shield Anchors (M10 x 60, Silver) are designed for builders and DIY enthusiasts requiring robust anchoring solutions for heavy-duty applications in concrete and masonry. Their key benefit is providing reliable, corrosion-resistant support for substantial loads. A minor consideration is their specialized use in solid materials, making them unsuitable for lighter substrates. This guide covers their features, performance, installation, and maintenance.
| Colour | Silver |
|---|---|
| Model Part Number | FJASHOM10 |
| Brand | JCP CONSTRUCTION PRODUCTS |
These shield anchors are designed for use in solid concrete, brick, and dense masonry. They are not suitable for hollow walls, plasterboard, or other lightweight building materials.
This anchor is compatible with M10 bolts. Ensure the bolt length is sufficient to pass through your fixture and engage properly with the anchor.
Drill a hole of the specified diameter and depth, clean it thoroughly, insert the anchor until flush, and then tighten the M10 bolt. The anchor expands within the substrate to create a secure hold.
Yes, the zinc-plated finish provides corrosion resistance, making them suitable for many outdoor applications. However, performance may degrade faster in highly corrosive environments.
The zinc plating provides a protective layer that resists rust and corrosion, extending the lifespan of the anchor, especially in damp or exposed conditions.
Shield anchors are generally designed for permanent installation. Attempting to remove and reuse them may compromise their holding power and is not recommended for critical applications.
Ensure the drilled hole is the correct diameter and depth. Clean the hole thoroughly. Verify the anchor is fully inserted and flush with the surface before tightening the bolt.
Check that you are using an M10 bolt. Ensure the anchor is not damaged and the internal threads are clear of debris. Verify the anchor is fully seated.
The hole may be too large or not deep enough. Remove the anchor, and if possible, use a slightly larger anchor or fill the hole and re-drill. Ensure the anchor is fully expanded and wedged before final tightening.
This is typically cosmetic on the zinc plating. For critical applications, consider replacing the anchor if significant degradation is observed. Ensure proper installation to minimize water ingress.
Setup:
Compatibility:
Care:
