Best current price£38.87from Rapid Online - Rapid Electronics Ltd.
Shopping.co.uk recommended and popular offers
Rapid Online - Rapid Electronics Ltd.£38.87Visit shop LAPP 4510032 H05V-K Single Core Wiring Cable 20AWG Brown (100m)
Visit shop24 offers from £38.87 - £460.34
View price history by clicking the chart icon.
The Lapp H07V-K installation wire is a high-performance, single-core cable designed for professional electrical applications, including control cabinet wiring and device installations. It provides exceptional flexibility thanks to its class 5 fine-wire copper conductor, making it an ideal choice for complex routing in fixed installations. While highly versatile, users should note that it is specifically designed for indoor environments and is not intended for high-stress outdoor exposure without appropriate protection.
| Colour | Brown |
|---|---|
| Model Part Number | 4520035 |
| Brand | LAPP |
It is intended for fixed, protected installation. It should be placed inside conduits or ducts if exposed to environmental conditions.
The wire is rated for a temperature range of -40 to 70 °C during fixed installation.
Yes, it meets the CPR Euro fire class Eca requirements under EN 13501-6.
No, this cable is not rated for direct burial; it must be installed within protective conduits or specific building structures.
It is a Class 5 fine-wired stranded copper conductor.
The operating voltage is rated between 450V and 750V.
Ensure the conduit diameter is sufficient for a 6.8mm outer diameter cable and use a cable lubricant to reduce friction.
Cease installation immediately; if the insulation is compromised, the section must be replaced to prevent short circuits.
Calculate total circuit length and load requirements to ensure the 10mm² cross-section is sufficient for your specific voltage drop tolerance.
Installation of the H07V-K wire should always be performed by a qualified electrician to ensure safety and compliance with local building regulations. When stripping the PVC insulation, use a professional cable stripper to avoid nicking the fine copper strands, as damage to these strands can reduce the current-carrying capacity or cause hotspots. Ensure that all terminations are securely crimped using compatible lugs or ferrules for 10mm² conductors. The cable should be stored in a dry, cool environment before use. During installation, avoid exceeding the minimum bend radius, which could compromise the PVC jacket integrity over time.
