Fossil Neutra Chrono - FS5525

A 50-meter (5 ATM) water resistance rating means the watch is suitable for short periods of recreational swimming in shallow water, hand washing, and light splashes. It is not suitable for showering, bathing, diving, snorkeling, or high-impact water sports. Always ensure the crown is pushed in completely before any water exposure.

To set the time, pull the crown out to the furthest position, rotate to adjust, then push back in. To set the date, pull the crown out to the middle position, rotate to adjust, and push back in. Avoid setting the date between 9:00 PM and 3:00 AM to prevent damaging the mechanism.

Yes, the Fossil Neutra Chrono W10177 has a standard 22mm lug width. You can replace the black IP stainless steel bracelet with any compatible 22mm strap, such as leather, silicone, or NATO, to change its appearance.

Battery life for quartz watches typically ranges from 1 to 3 years, depending on usage (e.g., frequent chronograph use). When the battery is low, the watch may stop or the seconds hand might 'jump' every few seconds. We recommend having the battery replaced by a professional to ensure proper sealing and battery type.

No, the rose-gold accents, including the hour markers and hands, are typically plated finishes designed to complement the watch's aesthetic. They are not made of solid gold.

Wipe the bracelet regularly with a soft, dry, lint-free cloth. For more persistent dirt, you can use a slightly damp cloth (with plain water) and then immediately dry it thoroughly. Avoid using abrasive materials or harsh chemical cleaners, as they can damage the IP coating.

This often indicates a low or depleted battery. Take your watch to a professional jeweler or watch repair shop for a battery replacement. Ensure they also check the water resistance seals if applicable.

Many quartz chronographs have a reset function. Pull the crown out to the time-setting position (furthest out). Then, use the chronograph pushers (usually the top and bottom ones) to manually adjust the chronograph hands back to the 12 o'clock (zero) position. Push the crown back in once adjusted.

First, ensure the time is set correctly, especially the AM/PM cycle. If you adjusted the date manually, make sure it wasn't done between 9:00 PM and 3:00 AM, as this can damage the date mechanism. If the issue persists, manually advance the time past 3 AM and then try setting the date again. If it's still stuck, professional servicing may be required.

This suggests a breach in the water resistance seal. Immediately take the watch to a professional watchmaker. Do not try to dry it yourself, as moisture can cause severe damage to the movement.