Fischer Drywall anchor - White

> Info needed: Specific load-bearing capacity for pictures, lights, and electrical installations.

Yes, the Fischer GK H typically uses a setting tool, often compatible with cordless screwdrivers, for flush installation. This tool is usually included with the fixing.

Yes, it is specifically designed for gypsum plasterboard (drywall) with thicknesses up to 15 mm, where pre-drilling is not required.

The GK H plug has a cross-drive recess in its head, allowing it to be removed like a standard screw by unscrewing it with an appropriate screwdriver.

It is suitable for lightweight items such as pictures, small mirrors, lightweight light fixtures, and basic electrical installations like cable clips.

Pre-drilling is not necessary for gypsum plasterboard panels up to 15 mm thick. For thicker boards or denser plasterboard, pre-drilling might be beneficial.

> Info needed: Explanation of the product code suffix 'RH K NV'.

Check if the plasterboard thickness exceeds 15 mm, which may require pre-drilling. Ensure the correct setting tool is being used and that the screwdriver is set to the appropriate torque and rotation.

The plasterboard material might be too weak or crumbly. Ensure the plug is fully seated and consider if the weight of the intended item exceeds the plug's capacity.

Ensure you are using a screwdriver that fits the cross-drive recess correctly and are attempting to unscrew it (counter-clockwise). If the plug is damaged, it may require careful cutting or removal.