Flomasta Compression T-Handle Valve - 15mm
Best current price£6.87from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£6.87Visit shop B&Q - Compression T-Handle Valve (Dia)15mm
Visit shopB&Q£6.87Visit shop One Offer
1 offer from £6.87
View price history by clicking the chart icon.
Product Information
Full details
This guide is for anyone using the Flomasta Compression T-Handle Valve (15mm) in domestic plumbing. This valve provides reliable water control and is WRAS approved, ensuring safety for drinking water applications. Note that proper installation and regular maintenance are crucial for optimal performance.
All features
| Brand | Flomasta |
|---|
Extended Product Information
FAQs
What is WRAS approval?
WRAS (Water Regulations Advisory Scheme) approval confirms that the valve meets the required standards for use with drinking water in the UK.
What materials is the valve made of?
The valve is made of brass.
What size pipe does this valve fit?
This valve is designed for 15mm copper pipes.
Can I use this valve with other types of pipes?
It is designed to be used with 15mm copper pipes.
How do I tighten the compression fittings?
Use two spanners, one on the valve body and one on the compression nut, to tighten the nut until it is secure but not over-tightened.
What should I do if the valve leaks?
First, ensure that the compression nuts are properly tightened. If the leak persists, check the compression olives and the pipe ends for any damage. You may need to replace the valve.
How often should I inspect the valve?
Inspect the valve regularly, ideally every few months, for any signs of leaks or damage.
Can I use this valve in a hot water system?
Yes, this valve is suitable for use in both hot and cold water systems within the specified pressure and temperature ratings.
Troubleshooting
Valve leaks after installation.
Ensure compression nuts are tightened correctly. If the leak persists, slightly tighten the nuts. If the leak continues, check the olive and compression fitting for damage or misplacement.
Handle is difficult to turn.
Check for any obstructions or debris. The valve might need to be replaced if the handle is still hard to turn.
Reduced water flow.
Ensure the valve is fully open. Check for any blockage or sediment in the valve body, and consider flushing the system.
Pros and Cons
Pros
- Durable brass construction ensures a long lifespan.
- WRAS approval guarantees safety and suitability for potable water.
- Compression fittings make installation straightforward.
- T-handle design offers precise control and easy operation.
- Compliant with industry standards for reliability.
Cons
- Requires proper installation to prevent leaks.
- May require occasional tightening or maintenance.
- Brass can be susceptible to corrosion in certain water conditions, although this is less likely due to the quality of the brass used.
- Not suitable for applications outside of domestic plumbing.
Setup, Compatibility & Care
Setup
- Preparation: Ensure the water supply is turned off before starting. Gather necessary tools, including a pipe cutter, spanners, and PTFE tape (if required).
- Cutting the Pipe: Use a pipe cutter to ensure a clean, square cut on the existing pipe.
- Inserting the Valve: Slide the compression nuts and olives onto the pipe before inserting the pipe into the valve body. Tighten the compression nuts using spanners until secure.
- Testing: Slowly turn the water supply back on and check for any leaks.
Compatibility
- Pipe Size: Compatible with 15mm copper pipes.
- Water Quality: Suitable for use with potable water.
Care
- Regular Inspection: Check for leaks periodically.
- Handle Operation: Operate the T-handle fully to avoid partial opening, which can cause wear.
- Cleaning: Wipe the valve with a damp cloth to remove any debris or build-up.
Similar items
John Guest Speedfit Adaptor - 12mm FI x 1/2" MIFrom £4
HydroSure Bush Adaptor - Black - 3/4'' BSP Male to 1'' BSP Female - Pack of 5From £5
DT Swiss 3-Pawl Freehub Body - Sram XD - 135mm QRFrom £25
Plasson Universal Slip Coupler - 24-28 x 24-28mmFrom £55
Plasson Mechanical Straight Coupler - 32 mmFrom £10
SLX F-Plug Connector Kit - Set Of 3 80mmFrom £2
Plasson Slip Coupler - 31-35mmFrom £64
SLX Coaxial Connector - SLXFrom £2
Salvus Gas Straight Bayonet Socket - 1/2" BrassFrom £10
Champion Spark Plug - RJ19LMCFrom £3
JG Speedfit Straight Tap Connector - 22mm x 3/4" BSPFrom £12
Mira Agile Thermostatic Shower Cartridge - 1736.950From £55