Polypipe 110mm Soil 92.5deg Bend Single Socket Black - SB409B

The 92.5° angle allows for precise directional changes in soil and vent pipe runs, ensuring efficient waste and odour flow while accommodating complex routing in residential installations.

While it is designed for the Polypipe PolySoil® system, the 110mm diameter and standard connection types (push-fit/solvent weld) may offer compatibility with other systems. However, using components from the same range is recommended for guaranteed performance and integration.

Push-fit uses an integral rubber ring seal for a watertight connection that is quick to install. Solvent weld uses a chemical adhesive to create a permanent, fused bond between the pipe and fitting, often requiring more time for curing.

Yes, when installed correctly using appropriate jointing methods (typically solvent weld for underground applications) and integrated into a properly supported system, it is suitable for underground use within residential drainage.

Once installed, the bend requires no special cleaning. Standard drain cleaning procedures can be followed. If the component itself is dirty before installation, wipe it clean with a damp cloth.

SB409B is the Polypipe manufacturer part number (MPN) for this specific product, the 110mm Soil 92.5° Bend with Single Socket in black.

This bend is specifically designed for soil and vent applications which carry waste water and manage odours. While 110mm is a common size, it is best practice to use components specifically rated and designed for rainwater systems.

Ensure pipe is fully inserted into socket for push-fit. For solvent weld, verify proper surface preparation and adequate cement application. Re-joint if necessary, ensuring full cure time for solvent welds.

Check for obstructions within the bend or downstream pipework. Ensure system slope is adequate for gravity flow. Periodic flushing may help prevent buildup.

Verify that pipe ends are clean and de-burred. Use a silicone lubricant for push-fit connections. Ensure the correct pipe diameter and type are being used.