Erismann Wallpaper - Beige

This method involves applying the wallpaper adhesive directly to the wall surface, rather than soaking the wallpaper itself. This often makes the hanging process faster and less messy.

While this wallpaper has a washable finish, it is primarily recommended for living rooms, bedrooms, and offices. For kitchens, which often experience higher humidity and grease, specialized kitchen wallpapers with enhanced durability and moisture resistance are usually preferred.

Vinyl wallpapers can sometimes be more challenging to remove than standard paper wallpapers. Typically, they can be stripped from the wall once a starting edge is lifted. If the backing remains, it may need to be softened with warm water and a stripping agent before scraping.

This wallpaper is designed to be used as a finished surface and is not intended to be painted over. Painting could obscure the texture and the delicate bamboo-inspired design.

Use a high-quality, ready-mixed or powder-based wallpaper adhesive specifically designed for vinyl wallpapers and the paste-the-wall application method. Follow the adhesive manufacturer's instructions for mixing and application.

Standard wallpaper roll dimensions typically vary, but common sizes are around 10 meters long by 0.52 meters wide. Please refer to the product packaging for exact dimensions.

Gently smooth out bubbles towards the nearest edge using a clean, dry cloth or a wallpaper smoothing tool while the adhesive is still wet. If the adhesive has dried, small bubbles may need to be carefully pricked with a pin and smoothed down.

Carefully adjust the second strip before the adhesive sets. Ensure you are not stretching the paper. If adhesive has dried, you may need to reposition or trim slightly to achieve a seamless match.

Ensure the wall surface was clean and dry before application. Check that the correct type and amount of wallpaper adhesive were used. Apply more adhesive to the wall area if necessary and re-hang the strip.

Use a sharp, fresh blade in a utility knife or craft knife for clean cuts. A metal straight edge can help guide your cuts for precise trimming along ceilings and skirting boards.