FC-100 Portable LED Macro Ring Flash - Topiky
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Topiky FC-100 Portable LED Macro Ring Flash is designed for photographers seeking soft, natural illumination for detailed close-up shots, such as macro photography, jewelry, or small product images. Its primary benefit is providing consistent and adjustable lighting that enhances detail and minimizes harsh shadows. A potential consideration is its reliance on external power, which is not included. Key features include 7 brightness levels, an LCD controller, left-right flash capability, and a wide range of adapter rings for lens compatibility.
All features
| Brand | Topiky |
|---|
Extended Product Information
FAQs
What type of batteries does the FC-100 use?
The FC-100 typically uses AA batteries. Please refer to the product manual for the exact number and type required. Batteries are not included.
Can I use this flash with any camera?
The FC-100 ring flash attaches to lenses via adapter rings (40.5mm-77mm). It is compatible with any camera that has a lens with a compatible filter thread size.
How does the sleep mode work?
The unit automatically enters a low-power sleep mode after 30 seconds of inactivity to conserve battery life. Pressing any button on the controller will wake it up.
Does the ring flash come with a power adapter?
The FC-100 Portable LED Macro Ring Flash requires batteries or a compatible external power source, which are typically sold separately. Please check the product listing for specific inclusions.
How do I adjust the brightness?
Brightness is adjusted using the intuitive LCD controller. Simply use the controls on the controller to cycle through the 7 available brightness levels.
What is the purpose of the left-right flash function?
This function allows you to activate only the left side or only the right side of the ring flash, or both. This helps create directional lighting, revealing texture and depth in your subject.
Troubleshooting
Ring flash does not turn on.
Ensure fresh batteries are correctly inserted or the external power source is properly connected. Check that the power switch on the controller is in the 'on' position.
Inconsistent light output.
Verify that the batteries are not low on power. Try replacing them with new ones. Ensure all cable connections between the flash unit and controller are secure.
Flash unit is loose on the lens.
Confirm that the correct size adapter ring is being used and that it is screwed on tightly to both the lens and the flash unit. Ensure no debris is obstructing the threads.
LCD controller is unresponsive.
Try removing and reinserting the batteries. If using an external power source, ensure it is providing adequate power. If the issue persists, contact customer support.
Pros and Cons
Pros
- Provides soft, even lighting perfect for macro photography.
- Offers fine-grained control over brightness with 7 levels.
- Wide compatibility with various lens sizes via included adapter rings.
- User-friendly LCD controller for easy operation.
- Energy-saving sleep mode extends battery life.
Cons
- Requires external power source (batteries or AC adapter, not included).
- May not provide sufficient power for very fast-moving subjects.
- Left-right flash function requires manual adjustment for optimal effect.
- Limited reach for non-macro subjects.
Setup, Compatibility & Care
Setup:
- Select the appropriate adapter ring for your camera lens.
- Screw the adapter ring onto the front of your lens.
- Attach the FC-100 ring flash unit onto the adapter ring until it is secure.
- Insert batteries (not included) or connect an external power source to the controller.
- Connect the ring flash to the controller using the provided cable.
Compatibility:
The FC-100 is compatible with most DSLR and mirrorless cameras, provided the lens has a filter thread within the 40.5mm to 77mm range. Ensure your camera's hot shoe is functional if using an external controller.
Care:
- Clean the lens and flash unit with a soft, dry microfiber cloth. Avoid using abrasive cleaners or solvents.
- Store the unit in a cool, dry place, preferably in its original packaging or a protective case.
- Remove batteries when the unit is not in use for extended periods to prevent leakage.