Shopping.co.uk

TP-Link MC100CM - Fast Ethernet Media Converter - SC Multi-mode

TP-Link MC100CM - Fast Ethernet Media Converter - SC Multi-mode

The TP-Link MC100CM is a Fast Ethernet Media Converter designed to convert 100BASE-FX fiber to 100...

Best current price£16.99from Amazon

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular
Amazon£16.99Visit shop

TP-Link Gigabit SFP Media Converter, Complies with IEEE 802.3ab and IEEE 802.3z, FX Port Supports Hot-Swappable (MC220L)

Visit shop

All Offers

37 offers from £16.99 - £63.36

View price history by clicking the chart icon.

AmazonTP-Link Gigabit SFP Media Converter, Complies with IEEE 802.3ab and IEEE 802.3z, FX Port Supports Hot-Swappable (MC220L)
Free delivery in 1–3 days
£16.99
Visit shop
PCHUB.UKTp-Link Omada Media Conv. 1000Base-Sx/Lx/Lh
Free delivery in 1–3 days
£19.17
Visit shop
Refresh CartridgesTP-LINK (MC220L) Gigabit SFP Media Converter 1x GB Auto-Negotiation RJ45 Half-Duplex/Full-Duplex
Free delivery in 1–3 days
£20.17
Visit shop
Laptops Direct (BID)Tp-Link Mc220l Gigabit Ethernet Media Converter Lc Multi/Single-Mode Black, Laptops Direct - MC220L
£6.95 delivery
£22.97
Visit shop
Servers Direct (BID)Tp-Link Black Mc220l Gigabit Ethernet Media Converter Lc Multi/Single-Mode
£6.95 delivery
£22.97
Visit shop

Used Offers

4 offers from £12.98 - £16.19

View price history by clicking the chart icon.

eBayTP-Link (MC100CM) 10/100MBPS MULTI MODE MEDIA CONVERTER #43
Free delivery in 1–3 days
£12.98
Visit shop

Product Information

Full details

This guide is for network administrators and IT professionals looking to extend network distances using fiber optic cables. The TP-Link MC100CM allows you to convert between 100BASE-FX fiber and 100Base-TX copper media, extending your network reach. It's a reliable solution for various networking needs, though it's important to note that it's designed for multi-mode fiber and requires an SC-Type connector.

All features

Model Part NumberMC100CM V1
BrandTP-LINK

Extended Product Information

FAQs

What type of fiber does the MC100CM support?

The MC100CM supports multi-mode fiber optic cables.

What type of connector does the MC100CM use?

It uses SC-Type connectors for fiber optic connections.

What is the maximum distance the MC100CM can extend the network?

Up to 2 kilometers with multi-mode fiber.

Does the MC100CM support auto-negotiation?

Yes, it supports auto-negotiation of duplex mode on the TX port.

Can I use the MC100CM with a Gigabit network?

No, the MC100CM operates at 10/100 Mbps.

What are the LED indicators for?

They indicate the status of the power, the fiber optic link, and the Ethernet link.

Is an external power supply required?

Yes, an external power supply is included with the device.

Troubleshooting

No link light on the TX port.

Check the Ethernet cable connection and ensure the connected device is powered on. Verify the cable is not damaged.

No link light on the FX port.

Check the fiber optic cable connection and ensure the connected device is powered on. Inspect the fiber cable and connectors for damage and cleanliness.

Slow data transfer speeds.

Ensure both connected devices are set to the correct speed settings (100 Mbps) and that the network is not congested. Check the cabling for damage or interference.

Device is not powering on.

Ensure the power adapter is correctly connected to the MC100CM and the power outlet. Test with a different power outlet.

Pros and Cons

Pros

  • Simple and effective solution for extending network distances.
  • Supports auto-negotiation and auto MDI/MDI-X for easy setup.
  • Provides clear status indication via LED lights.
  • Can be used as a standalone device or integrated into a 19-inch system chassis.
  • Supports full wire speed forwarding rates.

Cons

  • Limited to multi-mode fiber only.
  • Requires an SC-Type connector, which might not be compatible with all fiber setups.
  • The data transfer rate is limited to 100 Mbps.
  • Does not support Gigabit Ethernet.
  • External power supply required.

Setup, Compatibility & Care

  1. Connecting the Fiber Cable:
  • Connect the SC-Type fiber optic cable to the FX port on the MC100CM and the other end to your fiber optic network device.
  1. Connecting the Ethernet Cable:
  • Connect the RJ45 Ethernet cable to the TX port on the MC100CM and the other end to your Ethernet network device.
  1. Powering the Device:
  • Plug the included power adapter into the MC100CM and connect it to a power outlet. The LED indicators will illuminate.

Compatibility:

The MC100CM is compatible with:

  • 100Base-FX fiber optic devices using multi-mode fiber and SC connectors.
  • 10/100Base-TX Ethernet devices.

Care:

  • Keep the device in a dry and well-ventilated area.
  • Protect the fiber optic connectors from dust and debris.
  • Clean the device with a soft, dry cloth. Do not use liquid cleaners.

Price History

DatePrice
Visit shop