Synology MR2200ac Tri-Band Router

Log in to the SRM interface, go to Control Panel > System > Update & Restore. Then follow the on-screen instructions.

Yes, the MR2200ac is compatible with most modems. Connect an Ethernet cable from your modem to the WAN port of the router.

The MR2200ac can handle multiple devices simultaneously thanks to its MU-MIMO technology. The exact number depends on usage and bandwidth requirements.

The range depends on the size and layout of your home, and interference sources. Using multiple MR2200ac units in a mesh network can extend the coverage.

Yes, it supports guest Wi-Fi networks allowing you to provide internet access to visitors without sharing your primary network password.

Press and hold the reset button on the back of the router for about 10 seconds until the LED indicator blinks. This will reset the router to its default settings.

The MR2200ac supports various security protocols including WPA2 and WPA3 for secure wireless connections and also includes a built-in firewall.

Restart the router and check the placement. Ensure it is in an open area, and not near obstructions. Check for firmware updates in SRM.

Ensure the router is connected to your computer. Try accessing the interface using `router.synology.com` or the router's IP address. Reset the router to factory settings if needed.

Check your internet connection speed. Ensure the router's firmware is up to date and reduce the number of connected devices.

Verify the settings in Safe Access. Ensure the devices are correctly assigned to the appropriate profiles.