Hardware Solutions Picture Hanging Kit - Silver

You will typically need a hammer, a screwdriver (Phillips or flathead, depending on the screws), a drill (for certain anchors), a level, and a measuring tape.

Estimate the weight by lifting the picture. If in doubt, choose a hanger rated for a higher weight than you think is necessary.

While the kit includes some anchors, concrete walls often require specialized fixings. Consider using concrete screws or masonry anchors, which are not included.

The copper wire can be used to create a hanging loop on the back of pictures that don't already have one. Secure the wire to the frame using Screw Eyes or by threading it through the frame.

Fish Anchors are suitable for use in plasterboard/drywall. Other anchors like Red Anchors are suitable for other wall types. Always choose the correct anchor for your wall.

Carefully remove the picture and the hanging hardware. If there are small holes, you can fill them with spackle or wall filler and touch up the paint.

Check that the hanging hardware is securely installed. Adjust the position of the hooks or re-install if necessary.

Replace the hanger with one that has a higher weight capacity. Ensure the hanger is appropriate for the wall type.

Ensure you are using the correct fixing for the wall type (e.g., use anchors for drywall or plaster). Try a different type of fixing, or consider using a different location.