DeWalt Worktop Jig - 650mm DXWJ650E

You need a 1/2" router bit. Ensure the bit is suitable for the material you are working with (e.g., laminate, solid wood).

The jig is compatible with any 1/2" plunge router that can accept a 1/2" bit and a 30mm guide bush.

This jig is suitable for use with compact laminate, composite, solid wood, and chipboard laminate worktops.

The jig includes various radii options (R400, R100, R40) to create rounded corners. Refer to the jig's instructions for setting up the desired radius.

Store the jig in a dry place to prevent moisture damage. Make sure it's clean and free from debris.

The clamp recess slots provide a secure location for clamps, ensuring that the jig and worktop remain firmly in place during the routing process.

Dog bones are used to provide space for bolts during the jointing process to ensure a secure fit.

Warranty information is not available in the product data.

Double-check the measurements and alignment using the VisonLine® technology. Ensure the jig is clamped securely.

Use a sharp, high-quality router bit appropriate for the material. Adjust the cutting depth in small increments.

Replace any damaged pegs. Ensure the pegs are properly inserted and secured before use.