This quick drying polyurethane varnish can be used on bare wood, hardboard, MDF, and unsealed cork...This quick drying polyurethane varnish can be used on bare wood, hardboard, MDF, and unsealed cork for interior and exterior use. It offers long-lasting wood protection, is low odour and non-toxic, and enhances the beauty of wood. It also resists alcohol and boiling water, and brushes can be cleaned with water. This water-based, non-yellowing varnish is tough and durable, resisting cracking, peeling, and blistering. Suitable for all types of interior and exterior wood, including hard and softwood, doors, windows, garden furniture, conservatories, and can be used as a sealer for concrete.
Best current price£18.65from Blueperry agriculture (UK)
Rustins Clear Rustinsquick Dry Poly Varnish Matt 1Ltr -Tough, Water-Based Finish In Gloss, Matt Or Satin; Durable Protection For Interior Wood, Furniture And Floors
AmazonRustins Clear Rustinsquick Dry Poly Varnish Matt 1Ltr -Tough, Water-Based Finish In Gloss, Matt Or Satin; Durable Protection For Interior Wood, Furniture And Floors
This guide is designed for users of Rustins Quick Dry Polyurethane Varnish, providing essential information for effective application and maintenance. The varnish offers superior protection and enhances the natural beauty of wood surfaces. While it's suitable for various applications, proper surface preparation is key to achieving the best results.
All features
Model Part Number
POMCW1000
Brand
Rustins
Extended Product Information
FAQs
How many coats of varnish should I apply?
Apply at least two to three coats for optimal protection. The number of coats may vary depending on the wood's use and desired finish.
Can I use this varnish on exterior wood?
Yes, this varnish is suitable for both interior and exterior use. However, ensure the wood is adequately protected from the elements.
How do I clean the brushes after use?
Brushes can be easily cleaned with water.
What is the drying time between coats?
The drying time is typically 2-4 hours, but always refer to the manufacturer's instructions on the product label for specific guidance.
Is sanding necessary between coats?
Yes, lightly sanding between coats with fine sandpaper will help ensure a smooth, professional finish.
Can I use this varnish on previously painted surfaces?
No, this varnish should be applied to bare wood, hardboard, MDF, or unsealed cork only. Remove the old finish first.
Troubleshooting
Varnish is not drying properly.
Ensure adequate ventilation and that the room temperature is within the recommended range. Check for excessive humidity.
Brush marks are visible.
Apply thinner coats and ensure the brush is of good quality. Lightly sand between coats.
The finish is not smooth.
Sand the surface lightly with fine sandpaper between coats to smooth out any imperfections.
Varnish is peeling or cracking.
This often indicates improper surface preparation or the application of varnish over incompatible finishes. Ensure the surface is clean, dry, and properly prepared before application. Remove the old finish, and start again.
Pros and Cons
Pros
Quick drying time allows for faster project completion.
Provides durable and long-lasting protection for wood.
Suitable for various applications, including doors, windows, and furniture.
Water-based formula is low odour and easy to clean up.
Resists common household substances like alcohol and boiling water.
Cons
Requires proper surface preparation for optimal results.
May require multiple coats for desired finish and protection.
Not suitable for all types of wood, always test in an inconspicuous area first.
Can be sensitive to extreme temperatures and humidity during application.
Setup, Compatibility & Care
Setup
Preparation: Ensure the wood surface is clean, dry, and free from any old finishes, wax, or grease. Sand the surface lightly with fine sandpaper to provide a key for the varnish.
Application: Stir the varnish thoroughly before use. Apply the first coat evenly with a brush, following the grain of the wood. Avoid applying too much varnish at once to prevent runs or sags.
Drying: Allow each coat to dry completely according to the manufacturer's instructions, typically 2-4 hours. Lightly sand between coats with fine sandpaper to ensure a smooth finish.
Coats: Apply at least two to three coats for optimal protection, depending on the desired finish and the wood's use.
Compatibility
Suitable for use on bare wood, hardboard, MDF, and unsealed cork.
Compatible with both hard and softwood.
Can be used as a sealer for concrete.
Care
Clean spills immediately with a damp cloth.
Avoid using abrasive cleaners or solvents.
Regularly dust the surface to maintain its appearance.
Blueperry agriculture (UK)£18.65Visit shop 
Amazon£21.00Visit shop 
