Airvent Ceiling Fan - 36"/900mm

The direction of rotation is reversed to switch between modes. For winter (destratification), the fan should draw air upwards. For summer (cooling), the fan should push air downwards. The method to change direction typically involves a switch on the fan motor housing or a specific wiring configuration.

The 900mm (36") blade span is generally suitable for medium-sized rooms such as bedrooms, home offices, or smaller living areas.

No, this Airvent ceiling fan is designed with a permanently lubricated motor and does not require periodic oiling.

The fan is designed for easy installation, but it does involve working with electrical wiring. If you are not comfortable with basic electrical work, it is recommended to hire a qualified electrician.

Destratification is the process of mixing air layers in a room. In winter, warm air rises and collects near the ceiling. The fan, set to run in reverse, gently circulates this warm air downwards, helping to even out room temperature and improve heating efficiency.

The product description does not specify the inclusion of a remote control. Please refer to the product packaging or manufacturer's specifications for details on included accessories.

Turn off the power supply. Use a soft, dry cloth to dust the blades. For stubborn dirt, a slightly damp cloth can be used, but ensure the blades are dry afterwards. Never use abrasive cleaners.

Check that the power is switched on at the mains. Ensure all wiring connections are secure and correct. Verify the wall switch is in the 'on' position.

Ensure all blade screws are tight. Check that the mounting bracket is securely fastened to the ceiling. Ensure the down rod is properly seated in the mounting bracket.

Make sure blade screws are tight. Check for any loose screws on the motor housing or light kit (if applicable). Ensure the fan is not rubbing against anything.

Ensure the fan is completely stopped before attempting to change direction. Check the physical direction switch on the motor housing (if applicable) or consult the wiring diagram for the specific model's reversal method.