Best current price£4.60from Professional Building Supplies
Shopping.co.uk recommended and popular offers
Professional Building Supplies£4.60Visit shop Freefoam White Ogee Fascia Internal Corner - 300Mm
Visit shop2 offers from £4.60
View price history by clicking the chart icon.
The Ogee Fascia Internal Corner is designed for professional roofline installers and DIY enthusiasts looking to achieve a seamless finish on their roofline projects. It serves as the critical solution for concealing the mandatory 10mm expansion gap between PVC fascia boards at internal corner points, such as the foot of a valley. While it provides an essential aesthetic and functional bridge, users must be careful to follow specific bonding techniques to allow for thermal expansion, or the installation may suffer from bowing or joint failure.
| Model Part Number | FOXI |
|---|---|
| Brand | PBSL Group |
No, this corner is specifically profiled to match the Ogee aesthetic and will not provide a flush fit on square or bullnose fascia boards.
You only need a standard fine-toothed saw or hacksaw for cutting, a tape measure, and a silicone applicator gun.
No. Only glue one side. The other side must be sealed with low-modulus silicone to allow the material to move during temperature changes.
Yes, PVC expands and contracts significantly with temperature changes; failing to leave a gap can result in structural failure of the fascia joints.
Generally, PVC roofline products are designed to be maintenance-free and are not intended to be painted. Painting may void warranties or cause the PVC to absorb more heat, leading to distortion.
This indicates the fascia boards were installed without the required 10mm expansion gap. You may need to trim the fascia back to allow for movement.
Ensure the surface was cleaned with a solvent wipe before applying the silicone. Use only low-modulus silicone to ensure enough flexibility for thermal movement.
To install, ensure your fascia boards are cut with a consistent 10mm gap at the corner junction. Use a fine-toothed saw or a standard hacksaw to trim the internal corner component to the required height of your fascia.
Installation Steps:
For care, simply wipe down with a damp cloth and mild soapy water during your routine gutter cleaning schedule. Avoid abrasive sponges or harsh solvent-based cleaners that may damage the PVC finish.
