Nikon AF-P DX NIKKOR 70-300mm f/4.5-6.3G ED VR Lens - Black

No, this specific model (AF-P DX NIKKOR 70-300mm f/4.5-6.3G ED) does not have built-in Vibration Reduction (VR). However, many Nikon camera bodies offer in-camera stabilization.

Yes, you can mount it on an FX camera, but it will only cover the DX (crop) area of the sensor, effectively giving you a longer focal length but with a reduced image resolution. It's primarily designed for DX cameras.

AF-P lenses utilize a stepper motor for faster, quieter autofocus, which is particularly beneficial for video recording. Older AF-S lenses use a different motor system that can be slower for video but may offer broader compatibility with older camera bodies.

The minimum focus distance is 1.1 meters (approximately 3.6 feet), allowing for reasonably close shots within its telephoto range.

Typically, the lens comes with an HB-97 Lens Hood, an LC-58 Front Lens Cap, and an LF-4 Rear Lens Cap. A warranty card and safety information are also usually included.

Its variable aperture (f/4.5-6.3) makes it less ideal for very low-light situations compared to lenses with wider constant apertures. You may need to increase your ISO or use slower shutter speeds, potentially requiring a tripod.

The 'G' designation indicates that the lens does not have an aperture ring. Aperture is controlled electronically via the camera body.

Check camera compatibility with AF-P lenses. Ensure the camera's firmware is updated. Clean the lens and camera contacts. If on an older body, autofocus may be limited or unavailable; try manual focus.

Ensure the lens is securely mounted. Check that the focus mode is set correctly (AF or M). Use a stable shooting surface or tripod for sharp shots, especially at longer focal lengths. Ensure the correct focal length is selected for your subject.

This lens includes an ED element to minimize this. However, in very high contrast situations, some aberration may occur. Post-processing software can often correct minor fringing.

Ensure you are using a Nikon F-mount camera compatible with DX lenses. Align the mounting indexes correctly. Gently insert and rotate the lens. Do not force the lens.