TP-Link Omada BE9300 Ceiling Mount Tri-Band Wi-Fi 7 Access Point - EAP772

The range varies depending on the environment, but it can typically cover a large area. Obstructions and interference can reduce the range.

Yes, you can use the access point in standalone mode, but you will not have access to all the features, such as centralized management and advanced security settings. It's highly recommended to use the Omada controller.

You can update the firmware through the Omada controller. Go to the device settings and look for the firmware update option. It's best to perform the update during off-peak hours.

The EAP772 supports WPA3, WPA2-Personal, WPA2-Enterprise, and various other security protocols.

You can configure up to 24 SSIDs.

Yes, the EAP772 supports VLANs.

MLO allows devices to connect to multiple radios simultaneously to increase throughput and reduce latency.

Check the power connection, including the PoE switch or power adapter. Verify the power source is working correctly.

Check the placement of the access point. Ensure it is not blocked by walls or other obstructions. Reduce the number of devices connected or upgrade the internet plan if necessary. Update the firmware.

Verify the access point is connected to the network and the Omada controller is running. Ensure there are no firewall rules blocking communication.

Ensure your client devices support 6 GHz and are close enough to the access point. Check for interference from other devices operating on the 6 GHz band.

Confirm that the guest network is enabled in the Omada controller and configured correctly. Check the network isolation settings.