AB Tools Impact Socket - 13mm

A deep impact socket is designed to accommodate longer bolts or studs that extend beyond the fastener head, and it provides better access in recessed areas compared to standard sockets.

Yes, you can use this socket with a standard 1/2" drive ratchet or breaker bar. However, its design is optimized for the higher torque and repeated impacts generated by impact wrenches.

CR-v steel stands for Chrome-Vanadium steel, a high-quality alloy known for its strength, hardness, and resistance to corrosion, making it ideal for tools subjected to high stress.

The phosphate finish provides excellent corrosion resistance, helping to protect the steel socket from rust and wear, thereby extending its lifespan, especially in harsh workshop conditions.

A single hex socket has six points of contact, providing a strong grip on standard hex fasteners. A double hex (12-point) socket has twelve points of contact, offering easier engagement on fasteners, especially in tight spaces, but may offer slightly less grip strength than a single hex.

The total length of this socket is 75mm.

The inner depth of the socket opening is 30mm.

Ensure you are using the correct 13mm socket and that the fastener head is not damaged or rounded. Verify the fastener is indeed metric.

Confirm the socket is fully seated on the fastener. Check if the fastener head is damaged or if the socket's internal hex is worn. For severely rounded fasteners, consider a specialized fastener removal tool.

Ensure you are using the correct drive tool and that the socket is rated for the applied torque. For extreme torque, use an impact wrench designed for such forces. If deformation persists, discontinue use as the socket may be compromised.

Clean the affected area with a wire brush or fine-grit sandpaper. Apply a light coat of lubricant or rust inhibitor to protect the surface. Store the socket in a dry place.