Best current price£119.90from Vevor UK
Shopping.co.uk recommended and popular offers
Vevor UK£119.90Visit shop VEVOR 47 Inch Tile Cutter Single Rail Double Brackets Manual Tile Cutter 3/5 in Cap with Precise Laser Manual Tile Cutter Tools for Precision Cutting Suitable for Porcelain and Ceramic Floor Tiles
Visit shop1 offer from £119.90
View price history by clicking the chart icon.
The VEVOR 1200 mm Tile Cutter is designed for professional contractors and serious DIY enthusiasts who require high-precision cuts on large-format ceramic and porcelain tiles. Its primary strength lies in its dual-track stability and infrared laser guidance, which makes complex, accurate cuts easier to execute compared to standard cutters. However, while it handles large tiles with ease, users should note that its substantial size requires a dedicated workspace and careful handling during transport to maintain alignment precision.
| Model Part Number | 010596584932 |
|---|---|
| Brand | VEVOR |
This model is primarily designed for ceramic and porcelain. Natural stone may vary in hardness and thickness, so proceed with caution.
Yes, it is recommended to check the alignment of the laser with the scoring wheel periodically to ensure maximum accuracy.
While the maximum is 1200 mm, the cutter can handle smaller tiles as long as they provide enough surface area for the support feet.
Keep the rails clean of ceramic dust and debris. A light application of silicone-based lubricant can help maintain smooth sliding.
The handle is designed for durability, but should it become damaged, ensure you use official replacement parts compatible with the VEVOR model.
Check the battery connection in the laser module and replace the batteries if necessary. Ensure the laser lens is clean.
Ensure you are applying firm, consistent downward pressure. If the wheel has become dull, it may require replacement to ensure clean cuts.
Verify that the tile is properly supported along the entire length of the rail and that the pressure is applied evenly across the breaker.
Before starting, ensure the double-track rail is free of debris or dust, as particles can interfere with the smoothness of the slider. To calibrate the laser, place a test tile on the board, make a small score, and verify that the laser beam lines up exactly with the cut path; adjust the laser housing if necessary. Keep the cutting wheel clean and free of tile shards to maintain sharpness. After heavy use, wipe down the guide rails with a dry cloth and apply a light machine oil if the slider feels sluggish. Store the tool in a dry, covered area to prevent surface oxidation on the metal rails.
