Swarovski EL Range TA Binoculars - 12x42 - Green

The maximum range varies depending on target reflectivity and atmospheric conditions, but it is designed for effective measurement at typical long-range shooting distances.

You can use the basic rangefinding functions (distance, angle) without the app. However, the app is required to input custom ballistic data and utilize advanced features like the Tracking Assistant.

Firmware updates are typically managed through the EL Range app. Ensure your binoculars are connected to the app and your smartphone has an active internet connection.

The binoculars use a standard replaceable battery, such as a CR2. Please refer to the product manual for the exact specification.

The Swarovski EL Range TA binoculars are water-resistant, meaning they can withstand rain and splashes. However, they are not designed to be submerged in water.

Yes, you can use the binoculars to measure distance and angle without a custom profile. However, for personalized ballistic corrections, creating a profile in the EL Range app is necessary.

Clean the lenses as needed. For best performance, it's recommended to brush off dust before each use and clean smudges with a microfiber cloth and lens solution periodically or when visibility is affected.

Ensure the battery is correctly inserted and has sufficient charge. Check that the rangefinder function is enabled in the settings via the app. Make sure the objective lens is clean and unobstructed.

Verify that Bluetooth is enabled on your smartphone and that the binoculars are in pairing mode. Ensure both devices are within close proximity. Try restarting both the app and the binoculars.

Check that the correct measurement units (meters/yards) are selected. Ensure the target is visible and not obstructed by foliage or other objects. Clean the lenses and rangefinder emitter/receiver.

Adjust the display brightness settings via the EL Range app. Ensure the ambient light conditions are suitable for viewing the display.