Hamilton Expression Synthetic Flat Paint Brush - 2" (50mm)

This brush is optimized for water-based paints such as latex and acrylics. It can be used with some oil-based paints, but synthetic bristles are generally best for latex and acrylics.

Load the brush evenly, maintain consistent pressure, and use long, overlapping strokes. Clean the brush regularly during use if painting large areas to prevent paint buildup. The Max Stroke technology is designed to assist with this.

The 2" (50mm) width is generally better suited for trim, cutting in, and medium-sized areas. For very fine detail work, a smaller brush would be more appropriate.

The lifetime guarantee typically covers manufacturing defects and assures the brush will perform as intended under normal use and care for the lifetime of the product. It does not cover damage from misuse or improper cleaning.

Clean the brush immediately after each use to prevent paint from drying in the bristles. For longer painting sessions, clean it periodically during breaks to maintain optimal performance.

Yes, this brush is suitable for use with water-based primers, providing consistent application.

Ensure the brush is clean and properly loaded with paint. Try varying your stroke pressure and direction. Check if the paint is too thick; thin slightly if necessary. Max Stroke technology aims to minimize this, but technique is still key.

This can occur due to improper cleaning or storage. Always clean thoroughly and reshape bristles before storing. Avoid storing with the bristles pressed down. If splaying persists, the brush may need replacement, though the lifetime guarantee may cover this.

Ensure the surface is properly prepared and clean. Check paint consistency; it might be too thin. If using with oil-based paints, consider a brush specifically designed for oil-based media for optimal results. The synthetic mix is best with water-based products.