Vigortronix Chassis Mount Transformer - 6VA 12V+12V

The transformer has a total power rating of 6VA. With a dual 12V output, this equates to approximately 250mA per 12V rail, assuming a perfect load distribution and minimal losses.

Yes, the transformer features two 115V primary windings that can be connected in series to accept a 230V input.

The transformer is designed for chassis mounting and includes a mounting clamp. Secure it firmly to a suitable metal chassis or panel using the provided hardware, ensuring it is stable and has adequate surrounding space for ventilation.

Please refer to the specific retailer or Vigortronix documentation for warranty details, as this information is not provided in the product description.

While the transformer has safety features like a shrouded bobbin, it should always be integrated into a circuit with appropriate fusing or circuit breakers for overcurrent protection, and all connections should be properly insulated and enclosed.

Yes, you can use one of the 12V secondary windings and leave the other disconnected, or use both to power separate circuits requiring 12V. Ensure the total load does not exceed the 6VA limit.

Verify that the primary windings are correctly connected to the mains supply (2 x 115V configuration). Check for loose connections or blown fuses in the connected circuit. Ensure the input voltage is within the specified range.

Ensure the transformer is not overloaded beyond its 6VA rating. Check for adequate ventilation around the unit. Verify that connections are not shorting.

Check the load current; if it exceeds the rated capacity, the voltage will drop. Verify input voltage stability. Ensure no partial short circuits exist in the load.

A slight hum is normal due to magnetic vibration. If the hum is excessively loud or changes pitch, check that the mounting clamp is secure and that the transformer is not vibrating against other components.