Diall Straight Aluminium External Edge Tile Trim
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide provides essential information for effectively using the Diall Straight Aluminium External Edge Tile Trim. Designed for both DIY enthusiasts and professional tilers, this trim offers a sleek, protective finish for tile edges, enhancing both aesthetics and durability. Note that the trim is specifically designed for tiles up to 12.5mm thick.
All features
| Brand | Diall |
|---|
Extended Product Information
FAQs
What is the maximum tile thickness this trim can accommodate?
The Diall Straight Aluminium External Edge Tile Trim is designed for tiles up to 12.5mm thick.
What tools are needed for installation?
You will need a measuring tape, a saw (hacksaw recommended), and a tile adhesive or construction adhesive. Clamps or tape may be useful to hold the trim in place while the adhesive cures.
Can I use this trim in a shower?
Yes, this trim is suitable for use in showers as it is made of aluminium and provides a waterproof finish when installed correctly.
How do I cut the trim to the correct length?
Use a hacksaw or a similar cutting tool to cut the trim. Ensure you measure accurately before cutting.
What type of adhesive should I use?
Use a tile adhesive or a construction adhesive that is suitable for the surface you are applying the trim to and for the type of tile you are using.
How do I clean the aluminium trim?
Clean the trim with a damp cloth and mild detergent. Avoid abrasive cleaners.
Troubleshooting
Trim doesn't align correctly.
Re-measure and re-cut the trim. Ensure the surface is even and free of debris before applying the adhesive.
Adhesive doesn't hold the trim in place.
Ensure you are using the correct adhesive for the tile and surface. Allow sufficient time for the adhesive to cure according to the manufacturer's instructions.
Pros and Cons
Pros
- Enhances the appearance of tiled areas.
- Protects tile edges from chipping and wear.
- Made from durable, corrosion-resistant aluminium.
- Easy to install, saving time and effort.
Cons
- Only suitable for tiles up to 12.5mm thick.
- Requires precise measurements for accurate cutting and fitting.
- May require additional tools for cutting (e.g., a hacksaw).
Setup, Compatibility & Care
- Preparation: Measure and cut the aluminium trim to the required lengths using a hacksaw or appropriate cutting tool. Ensure the cuts are clean and precise.
- Application: Apply adhesive (tile adhesive or a suitable construction adhesive) to the back of the trim.
- Positioning: Carefully position the trim along the tile edges, ensuring it aligns correctly and covers the exposed edges.
- Securing: Press the trim firmly into place to ensure proper adhesion. Use tape to hold the trim in place until the adhesive sets (refer to adhesive manufacturer's instructions).
- Compatibility: This trim is compatible with tiles up to 12.5mm thick. Always use appropriate adhesives suitable for the tile and the surface it is being applied to.
- Care: Clean the trim regularly with a damp cloth and mild detergent. Avoid abrasive cleaners that could scratch the surface. Ensure that any cleaning products used are suitable for aluminium.