Flood Sensor - Fibaro - FGFS-101-ZW5
Best current price£77.59from Amazon
Best offers
Shopping.co.uk recommended and popular offers
Amazon£77.59Visit shop Fibaro Flood Z-Wave Plus Water Leak, Freeze and Temperature Sensor, 3 V, White
Visit shopAmazon£77.59Visit shop One Offer
1 offer from £77.59
View price history by clicking the chart icon.
AmazonFibaro Flood Z-Wave Plus Water Leak, Freeze and Temperature Sensor, 3 V, White
Free delivery in 1–3 days
£77.59
Visit shop
Product Information
Full details
The Fibaro FGFS-101-ZW5 Flood Sensor is designed for homeowners seeking advanced protection against water damage and temperature-related issues. Its key benefit is providing early detection of leaks and temperature anomalies, automatically triggering alerts and potentially shutting off water supply to minimize damage. A potential caveat is its reliance on a Z-Wave network controller for full functionality.
All features
| Model Part Number | FGFS-101-ZW5 |
|---|---|
| Brand | Fibaro |
Extended Product Information
FAQs
What is the battery life of the Fibaro FGFS-101-ZW5?
Battery life varies depending on usage and network conditions, but typically lasts for several years with a single CR123A battery. Check your Z-Wave controller for battery status.
Can this sensor detect freezing temperatures?
Yes, the sensor monitors temperature within a range of -20 to 100 °C. You can set up alerts or automations for temperatures approaching freezing points.
Does the sensor require professional installation?
No, the sensor is designed for easy plug-and-play installation and does not require drilling or wiring. It pairs with your existing Z-Wave network.
What is the operating radius of the sensor?
The sensor has an operating radius of up to 50 meters, which can be extended by other Z-Wave devices in the mesh network.
Can I use this sensor outdoors?
The product is listed for 'Indoor/outdoor' use, however, ensure it is protected from direct environmental exposure like heavy rain or extreme temperatures outside its specified operating range.
How does the automatic water shut-off feature work?
This feature requires integration with compatible electrovalves and your Z-Wave controller. When the sensor detects a leak, it signals the controller, which then commands the electrovalve to close the water supply.
What Z-Wave frequencies does it use?
This model operates on the 868.4 MHz RF transmission frequency, common for Z-Wave devices in many regions.
Troubleshooting
Sensor not detected by Z-Wave controller
Ensure the sensor is within the operating radius of the Z-Wave controller. Try moving it closer during the inclusion process. Verify the battery is correctly installed and charged.
False leak alarms
Ensure the sensor is placed in a location where accidental water contact (e.g., condensation, spills) is unlikely. Check that the metal contacts are clean and free from corrosion.
Inaccurate temperature readings
Allow the sensor to acclimate to the room temperature for at least 30 minutes after installation. Ensure it's not placed directly next to a heat source or in direct sunlight if ambient temperature reading is desired.
Sensor offline in Z-Wave network
Check the battery level. If low, replace the battery. Ensure the sensor is still within range of other Z-Wave devices to maintain mesh network connectivity.
Pros and Cons
Pros
- Provides multi-functional protection including leak and temperature detection.
- Easy plug-and-play installation without complex wiring.
- Integrates with Z-Wave systems for smart home automation and notifications.
- Can automate water shut-off to prevent extensive damage.
- Compact and discreet design allows for versatile placement.
- Offers accurate temperature readings.
Cons
- Requires a Z-Wave network controller to operate.
- Battery-powered, requiring periodic battery replacement.
- Bluetooth interface is listed but its functionality in this specific variant may be limited to setup or specific integrations.
- Best performance relies on integration with other smart home devices (e.g., electrovalves).
Setup, Compatibility & Care
Setup:
- Ensure your Z-Wave network controller is operational.
- Insert the CR123A Lithium battery into the sensor.
- Add the sensor to your Z-Wave network by following your controller's instructions for device inclusion.
- Place the sensor in the desired location, ensuring the metal contacts are positioned to detect water.
Compatibility:
- Compatible with any Z-Wave certified network controller.
- Can be integrated with alarm systems and other smart home devices.
- Specific Z-Wave frequency is 868.4 MHz.
Care:
- Wipe the exterior with a soft, dry cloth. Avoid abrasive cleaners.
- Periodically check the battery level via your Z-Wave controller and replace the CR123A battery when low.
- Ensure the sensor's metal contacts are free from debris to maintain accurate detection.