Elan Cistern - White

This Elan Cistern is specifically designed for 'close-coupled' toilet pans, which are commonly found in modern bathrooms where the cistern and pan are installed directly next to each other.

The dual flush mechanism typically has an adjustable overflow or a mechanism on the lever that can be adjusted to fine-tune the 6 and 9-litre flush volumes. Refer to the specific adjustment points on the flush valve assembly.

The Elan Cistern includes a 14-inch by 9-inch flushpipe.

The cistern is designed with a side inlet, which typically means it's configured for one side (often the left). Check the product specifications or diagram for definitive side compatibility.

Basic maintenance involves cleaning the exterior with a damp cloth. Periodically, check the inlet valve and flush mechanism for debris and ensure seals are intact. Flush mechanism adjustments might be needed over time.

The cistern is designed to work with standard mains water pressures. If you have an unusually high-pressure system, a pressure-reducing valve might be advisable for longevity of components.

Please refer to the retailer or Bradfords' official documentation for specific warranty information, as this can vary.

Check the water supply isolation valve is open and the inlet valve is not blocked.

Ensure all seals and connections, particularly the flushpipe and inlet valve, are tightened and properly seated.

Inspect the flush lever mechanism and the diverter inside the cistern for any obstructions or misalignment. Adjustments may be needed.

The overflow pipe might be too low, or the syphon seal at the bottom of the cistern may be faulty. Check the overflow height and inspect/replace the syphon seal if necessary.