Lieber Anthracite IP65 Fire Rated Colour Changing Smart Downlight
This Lieber Anthracite colour changing smart downlight from our collection of Lieber Lighting down...This Lieber Anthracite colour changing smart downlight from our collection of Lieber Lighting downlights consists of a GU10 IP65 fire rated downlight and a smart LED GU10 bulb. Fire rated to 60 and 90 minutes, and robustly built with 2 connector clips for easy installation. With the Tuya Smart app you can change colour, dim the light, switch on and off and use the timer set up feature. It is also compatible with Amazon Alexa and Google Home to allow you to control your lights with your voice. Fire Rating: 60,90 MinutesSuitable for use in ceilings up to 30mm thick. Set to max 30mm, springs can be repositioned to 45mmIP Rating: IP65Suitable For Bathroom: Zone 1suitable for kitchensVoltage: 220-240VTransformer Required: NoCut out size: (mm) 72mm.
This Lieber Anthracite smart downlight is designed for homeowners seeking flexible, modern lighting solutions that integrate with smart home systems. Its key benefit is the ability to change colour, dim, and be controlled remotely or via voice command, enhancing ambiance and convenience. A potential caveat is its reliance on Wi-Fi and a smartphone app for full functionality.
All features
Colour
Grey
Model Part Number
RL-LL-10-DLR002-1AN
Brand
LIEBER
Extended Product Information
FAQs
What is the fire rating of this downlight?
The downlight is fire rated for 60 and 90 minutes, providing enhanced safety for your ceiling.
Can this downlight be used in a bathroom?
Yes, with an IP65 rating, it is suitable for use in bathroom Zone 1 and is protected against water jets.
What is the required cut-out size for installation?
The recommended cut-out size for this downlight is 72mm.
Do I need a separate transformer?
No, this downlight operates on a 220-240V supply and does not require a separate transformer.
How do I change the colour of the light?
You can change the colour using the Tuya Smart app or by using voice commands if linked to Amazon Alexa or Google Home.
What is the maximum ceiling thickness it can accommodate?
It is suitable for ceilings up to 30mm thick, and the springs can be repositioned to accommodate up to 45mm.
Does it work with Apple HomeKit?
This specific model is compatible with Amazon Alexa and Google Home, but not Apple HomeKit.
Troubleshooting
Downlight not turning on
Check that the power supply is on and the wiring is securely connected. Ensure the bulb is correctly seated in the socket.
Cannot connect to Wi-Fi or app
Verify that your Wi-Fi network is 2.4GHz. Ensure the downlight is within range of your router. Reset the bulb and try the pairing process again.
Voice control not working
Ensure the downlight is correctly linked to your Amazon Alexa or Google Home account through the respective apps. Check that your voice assistant device is online.
Light flickering
Check the bulb connection. If flickering persists, try replacing the smart bulb.
Pros and Cons
Pros
Versatile colour and dimming options for mood setting.
Convenient smart control via app and voice assistants.
High safety standards with IP65 and fire ratings.
Suitable for bathrooms and kitchens due to water resistance.
Straightforward installation process.
Cons
Requires a stable Wi-Fi connection for smart features.
Relies on a smartphone app for advanced control.
Colour accuracy may vary based on bulb quality.
Limited to GU10 bulb type.
Setup, Compatibility & Care
Setup:
Ensure power is switched off at the mains.
Cut the appropriate hole in your ceiling (72mm cut-out size).
Reposition springs if needed for ceiling thickness up to 45mm.
Connect the wires to the downlight fixture using the provided clips.
Insert the smart GU10 bulb into the fixture.
Install the downlight into the ceiling.
Restore power and follow the Tuya Smart app instructions to connect the bulb to your Wi-Fi network and pair it with voice assistants.
Compatibility:
Requires a 220-240V power supply.
Compatible with standard GU10 bulbs (smart bulb included).
Works with Amazon Alexa and Google Home.
Requires a 2.4GHz Wi-Fi network for app connectivity.
Care:
Always switch off power before cleaning.
Wipe the downlight with a dry or slightly damp soft cloth. Avoid abrasive cleaners.
Ensure ventilation around the fixture is not obstructed.