Bartoline Border & Overlap Adhesive is a specially formulated adhesive for fixing decorative borde...Bartoline Border & Overlap Adhesive is a specially formulated adhesive for fixing decorative borders to interior surfaces, including vinyl. Possessing high grab properties, easy to apply to all borders, and can also be used to reattach torn and ripped wallcoverings, and fixing seams. Application: Used primarily for fixing decorative borders to interior surfaces, and for minor repairs to existing wallcoverings. Simple to apply and enables the border to slide into position easily. Coverage: Approximately 250g of adhesive for a standard 10m x 13cm border.
This guide helps users effectively apply Bartoline Border & Overlap Adhesive to install or repair decorative borders on interior surfaces, especially vinyl. It provides strong adhesion and is easy to use. Be aware that proper surface preparation is essential for optimal results. This product is ideal for both new border installations and fixing existing wallcoverings.
All features
Colour
Multicolor
Model Part Number
341454
Brand
Bartoline
Extended Product Information
FAQs
What surfaces can I use this adhesive on?
This adhesive is designed primarily for decorative borders on interior surfaces, including vinyl.
How much adhesive do I need?
Approximately 250g of adhesive is sufficient for a standard 10m x 13cm border.
How do I prepare the wall surface?
The wall surface should be clean, dry, and free from any loose materials or existing adhesive residue.
Can I use this to repair wallpaper seams?
Yes, this adhesive is suitable for fixing seams and reattaching torn sections of wallcoverings.
How long does it take for the adhesive to dry?
Allow 24 hours for the adhesive to fully cure before handling or cleaning the border.
Is this adhesive ready to use?
Yes, the adhesive is ready mixed and can be applied directly from the container.
Troubleshooting
Border is not adhering properly.
Ensure the wall surface is clean and dry. Apply sufficient adhesive and press the border firmly against the wall.
Border is bubbling or lifting after application.
Ensure there are no air bubbles trapped beneath the border. Smooth out any bubbles with a smoothing tool or clean cloth.
Adhesive is visible after application.
Wipe away any excess adhesive immediately with a damp cloth before it dries.
Pros and Cons
Pros
Easy to apply, saving time and effort.
Provides a strong and lasting bond for borders.
Versatile use for installations and repairs.
Ready mixed formula for immediate use.
Cons
Requires proper surface preparation for optimal results.
Coverage is limited to approximately 250g for a standard 10m x 13cm border.
May not be suitable for all types of wallcoverings other than those specified.
Setup, Compatibility & Care
Surface Preparation: Ensure the wall surface is clean, dry, and free from any loose materials or previous adhesive residue.
Application: Apply the adhesive evenly to the back of the border. Follow the border manufacturer's instructions for specific application techniques.
Positioning: Carefully position the border on the wall and slide it into the desired location before pressing firmly to ensure adhesion.
Compatibility: This adhesive is specifically designed for decorative borders on interior surfaces, including vinyl. Always test on an inconspicuous area first if unsure about compatibility.
Care: After application, avoid excessive handling or cleaning of the border for the first 24 hours to allow the adhesive to fully cure.