LEDVANCE LED driver - DRPCPFM18/220240/350
Best current price£19.45from Tameson UK
Best offers
Shopping.co.uk recommended and popular offers
Tameson UK£19.45Visit shop Ledvance Led Driver - 4058075239838
Visit shopTameson UK£19.45Visit shop One Offer
1 offer from £19.45
View price history by clicking the chart icon.
Product Information
Full details
This LEDVANCE LED driver is designed for professionals and DIY enthusiasts seeking reliable, dimmable lighting solutions for constant current LED applications. Its key benefit is flexible dimming control and stable power delivery, with a potential caveat being manufacturer-specific dimming compatibility. It provides 18W of power with an output of 350mA and a voltage range of 32-54V, featuring a durable plastic housing (IP20) and a long lifespan of up to 50,000 hours. Available in various wattages, it supports independent installation and offers enhanced safety with Protection Class II.
All features
| Model Part Number | 4058075239838 |
|---|---|
| Brand | LEDVANCE |
Extended Product Information
FAQs
What is the maximum wattage this driver can supply?
This specific model, DRPCPFM18/220240/350, can supply up to 18W of power.
What type of LED fixtures is this driver suitable for?
It is designed for constant current LED applications where the LED load requires an output current of 350mA and falls within the 32-54V output voltage range.
Can I use any dimmer switch with this driver?
The driver supports phase cut dimming (leading and trailing edge) and push-button control. For phase cut dimming, it's recommended to use a compatible dimmer and check manufacturer specifications. Push-button dimming may have specific integration requirements.
What does IP20 mean for this driver?
IP20 means the driver is protected against solid objects greater than 12.5mm (like fingers) but offers no protection against water. It is suitable for dry indoor environments only.
What is the expected lifespan of this LED driver?
The driver has a rated lifespan of up to 50,000 hours under optimal operating conditions.
Is an earth connection required for this driver?
No, this driver is classified under Protection Class II, meaning it has enhanced insulation and does not require an earth connection.
Can I install multiple LED modules with this driver?
Yes, as long as the total voltage requirement of the LED modules falls within the 32-54V range and they require a 350mA current, they can be connected in series to this driver.
Troubleshooting
LED fixture does not turn on
Verify AC power supply and check all wiring connections for proper contact. Ensure the LED load is within the specified voltage and current range.
LED fixture flickers
Check for loose wiring connections. If using phase cut dimming, ensure the dimmer is compatible (leading/trailing edge) and correctly installed. Try a different compatible dimmer if possible.
Dimming is not smooth or responsive
Confirm that the dimming method (phase cut, push-button) is correctly implemented according to the instructions. Ensure the dimmer is compatible with the driver, especially if using manufacturer-specific dimming features.
Driver overheats
Ensure the driver is installed with adequate ventilation and is not enclosed in a way that restricts airflow. Check that the connected LED load does not exceed the driver's 18W capacity.
Pros and Cons
Pros
- Highly flexible dimming options (phase cut and push-button)
- Stable and consistent power delivery for LED longevity
- Broad voltage compatibility for diverse LED setups
- Durable construction with a long operational lifespan
- Enhanced safety features with Protection Class II rating
Cons
- Dimming may require manufacturer-specific settings for optimal performance
- IP20 rating limits use to dry indoor environments
- Requires careful selection of compatible dimmers for phase cut control
- No integrated emergency lighting function
Setup, Compatibility & Care
Setup: Ensure the driver is installed in a dry, indoor environment away from excessive moisture, as indicated by the IP20 rating. Connect the AC input wires (Live and Neutral) to the appropriate terminals. Connect the DC output wires to your constant current LED fixture, observing polarity. For dimming, connect the dimming control wires according to the chosen method (phase cut dimmer or push-button). An optional Cable Clamp Kit can be used for easier and more secure wiring.
Compatibility: This driver is designed for constant current LED applications. Ensure your LED load falls within the 32-54V output voltage range and requires a 350mA current draw. For phase cut dimming, verify compatibility with your chosen dimmer switch (leading or trailing edge). Refer to manufacturer-specific guidelines for optimal push-button dimming integration.
Care: Keep the driver clean by wiping it with a dry or slightly damp cloth. Avoid using abrasive cleaners or solvents. Ensure proper ventilation around the driver to prevent overheating and maintain its operational lifespan.