Draper Angle Grinder - 115mm, 950W

You should use 115mm diameter discs with a 22.2mm bore, specifically designed for angle grinders. Always check the disc's suitability for the material you are working on.

Use the spindle lock to secure the shaft and use the provided disc changing spanner to loosen and remove the disc. Install the new disc, secure it with the flange and tighten it using the spanner.

Always wear safety glasses, gloves, and a dust mask. Ensure the workpiece is securely clamped and that the guard is correctly positioned. Never use excessive force.

The variable speed allows you to adjust the grinder's speed to suit the material being worked on, providing optimal cutting or grinding performance.

Clean the grinder after each use with a dry cloth. Regularly inspect the cord and plug for damage. Store the grinder in a dry place.

Yes, the variable speed feature is ideal for polishing. Use a polishing pad and select a lower speed setting to prevent damage to the material being polished.

Check the power connection and ensure the plug is properly inserted into the outlet. Inspect the power cable for any damage.

Ensure the disc is properly secured with the spindle lock. Check for any obstructions or debris interfering with the disc's rotation.

Check the disc for any damage or imbalance. Ensure the side handle is securely attached. Reduce the pressure applied during operation.