PolyX PVC F Section Rafter Supported - 16mm - 3mtr - Brown

Name: PolyX PVC F Section Rafter Supported - 16mm - 3mtr - Brown
Brand: Storm
SKU: zj362tmbqc
Availability: InStock

The PolyX PVC F Section is a specialized edge trim designed to fit securely onto the edge of 16mm ...

Best current price£11.56from PVC Cladding UK

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular

PVC Cladding UK£11.56Visit shop

Molan Brown Exitex Pvc F Section Rafter Supported - 16Mmm X 3Mtr

Visit shop

All Offers

2 offers from £11.56 - £12.80

View price history by clicking the chart icon.

PVC Cladding UKMolan Brown Exitex Pvc F Section Rafter Supported - 16Mmm X 3Mtr

Free delivery in 1–3 days

£11.56

Visit shop

Professional Building SuppliesStorm Brown Polyx Pvc F Section Rafter Supported - 16Mmm X 3Mtr

Free delivery in 1–3 days

£12.80

Visit shop

Product Information

Full details

The PolyX PVC F Section is designed for DIYers and professional contractors seeking a clean, finished edge for 16mm polycarbonate roofing installations. It provides a robust, weather-resistant seal that protects exposed sheet sides from moisture and debris, though users should note it is specifically engineered for rafter-supported systems and may require precise cutting to match roof pitches.

All features

Model Part Number	PVCF163-B
Brand	Storm

Extended Product Information

FAQs

Can I use this on 10mm or 25mm sheets?

No, this specific profile is engineered exclusively for 16mm polycarbonate sheets for a correct fit.

Is the brown color fade-resistant?

The material is UV-stabilized to minimize color fading and brittleness under standard outdoor exposure.

Does it come with fixing screws?

No, the F section is designed to be held in place by friction against the sheet edge; additional sealant can be used for extra security.

How do I cut the PVC material?

A fine-toothed hacksaw or a miter saw with a plastic-cutting blade will provide the cleanest results.

Can this be used on unsupported edges?

It is intended for rafter-supported systems where the edge of the sheet is already adequately held in place by the primary glazing structure.

Troubleshooting

Profile is difficult to slide onto the sheet

Check that the polycarbonate sheet edge is free from burrs or sharp plastic debris; ensure the sheet is not compressed by tight clips.

Profile does not sit flush against the rafter

Verify that your rafter-supported glazing system allows for the thickness of the PVC leg of the F section.

Pros and Cons

Pros

Durable and weather-resistant material
Provides a clean, professional finish to roof edges
Easy to install on standard rafter-supported structures
Prevents internal sheet contamination
Color-matched brown finish blends with natural framing

Cons

Limited to 16mm sheet thickness
Rigid material requires careful measurement before cutting
Not intended for self-supporting glazing bars

Setup, Compatibility & Care

To install, measure the length of your rafters and cut the F section to size using a fine-toothed hacksaw. Ensure the polycarbonate sheet is securely fixed to the rafter before sliding the F section into place. No complex mechanical fasteners are typically required, but silicone sealant may be applied to the interior channel for extra weatherproofing. For maintenance, keep the PVC surface clean by wiping it down with a damp, soft cloth and a mild soap solution. Avoid using harsh solvents or abrasive scouring pads, as these can scratch the surface and degrade the UV-resistant coating.