kenable USB 2.0 Printer Cable - Black - 1.2m

USB Type A is the standard rectangular connector found on one end of the cable, typically connecting to the host computer. USB Type B is the squarer connector found on the other end, commonly used for peripheral devices like printers and scanners.

This cable is a USB 2.0 cable. While it may physically connect to a USB 3.0 Type B port, it will operate at USB 2.0 speeds (up to 480 Mbps) and is not capable of supporting USB 3.0 or higher data transfer rates.

This cable is primarily designed for printers and scanners that use a USB Type B connector. While some older external hard drive enclosures may use this type of port, most modern external drives use USB Type Micro-B or USB Type C. Check your hard drive's specifications.

AWG stands for American Wire Gauge. A lower AWG number, like 24, indicates a thicker wire, which allows for more efficient electrical current flow. This translates to faster charging and more reliable data transfer compared to cables with higher AWG numbers (thinner wires).

Yes, the cable supports charging for devices that draw power via their USB port, benefiting from the 24AWG copper for potentially faster charging than lower-quality cables.

The cable length is 1.2 meters (approximately 3.9 feet).

Yes, the product specifications indicate compliance with RoHS (Restriction of Hazardous Substances), meaning it adheres to environmental standards regarding the use of certain hazardous materials.

Ensure both ends of the cable are securely plugged in. Try a different USB port on your computer. Verify that the device itself is powered on and has the correct drivers installed (check the device manufacturer's website).

Confirm that the cable is fully inserted into both the computer and the device. Ensure you are using a USB 2.0 port on your computer. Check if the device itself is operating at USB 2.0 speeds. If the issue persists, try a different cable to rule out a faulty cable.

Check the cable for any visible damage. Ensure the cable is not routed near sources of strong electromagnetic interference. Try connecting the device to a powered USB hub if your computer's ports are overloaded or have insufficient power.