Winmau Switch Points - Smooth Black - T1B30

These points are compatible with the majority of standard steel-tip dart barrels, though you should confirm your barrel requires press-fit points.

Yes, you will need a dart repointing tool to safely remove your old points and press the new ones in without damaging the barrel.

The finish provides a sleek, non-reflective aesthetic and is designed to minimize friction as the dart enters the board.

Yes, you can use a standard dart sharpener to maintain the tip, but be careful not to remove too much metal, as this can affect the point's integrity.

You should replace your points when they become overly blunt, hooked at the tip, or if they begin to show signs of structural fatigue.

Ensure the point was fully seated during installation; if it remains loose, the barrel hole may be worn, and you may need to use a slightly larger diameter point or professional adhesive.

Check that the repointing tool is aligned perfectly straight; if it is still difficult, verify that you are not trying to force a point size that is incompatible with your specific barrel threading.