Best current price£22.99from eBay
Shopping.co.uk recommended and popular offers
eBay£22.99Visit shop Shimano SL-M7000-L SLX Front Shift Lever
Visit shop
Amazon£30.50Visit shop Shimano SHIFT Lever SLX M7000 band-on LH
Visit shop4 offers from £22.99 - £41.99
View price history by clicking the chart icon.
The Shimano SLX M7000 Left Hand Shift Lever is designed for XC, Trail, and Enduro riders seeking reliable and crisp 11-speed shifting at an affordable price. Its key benefit is the consistent, light feel across its Vivid Indexing and versatile 2-Way Release function, allowing shifts from various riding positions. A caveat is that it is exclusively for use with Shimano 11-speed MTB derailleurs only.
| Model Part Number | M7000 |
|---|---|
| Brand | SHIMANO |
No, the Shimano SLX M7000 shifter is specifically designed for Shimano 11-speed Dyna-Sys drivetrains only. It will not work with 10-speed or 12-speed systems.
This is a left-hand shifter primarily intended for rear derailleur control. Shimano's SLX M7000 series may have separate shifters for front derailleurs if needed, but this specific model is for 11-speed rear shifting.
The SLX M7000 shifter is available in Shimano's I-Spec II or I-Spec B specifications for direct mounting onto compatible brake levers, or as a standard handlebar clamp version.
Yes, the shifter typically comes complete with the inner and outer gear cables required for installation.
You can adjust the gear indexing using the integrated barrel adjuster located on the shifter body. Turn it counter-clockwise to increase cable tension (for smoother shifting to larger cogs) or clockwise to decrease tension (for smoother shifting to smaller cogs).
No, this shifter is designed to work exclusively with Shimano 11-speed MTB rear derailleurs due to differences in cable pull ratios between brands.
Use a soft, damp cloth to wipe down the shifter. Avoid using high-pressure water or strong cleaning agents, as they can damage the internal mechanisms or external finishes.
Check the shifter cable and housing for dirt or damage. Clean and lubricate the cable, or replace if necessary. Ensure the barrel adjuster is not fully bottomed out.
Adjust the cable tension using the barrel adjuster on the shifter or derailleur. Ensure the rear derailleur limit screws are set correctly and the derailleur hanger is straight.
Inspect the lever mechanism for obstructions or damage. Ensure the cable is properly seated within the lever's internal routing.
Ensure the display is correctly seated. Note that it provides a visual guide and should be used in conjunction with the feel of the shift.
Setup: The SLX M7000 shifter is available in two mounting specifications: I-Spec II and I-Spec B, which allow direct mounting to compatible Shimano brake levers, or a standard handlebar clamp version. Ensure you select the correct version for your handlebar and brake setup. The shifter comes complete with inner and outer gear cables. Installation involves routing the cable through the shifter, clamp, and then to the rear derailleur, ensuring proper tension and alignment. For I-Spec mounting, consult your brake lever's manual for precise attachment.
Compatibility: This shifter is exclusively designed for Shimano 11-speed Dyna-Sys MTB rear derailleurs. It will not function correctly with other brands or different speed configurations. The optical gear display is removable, and the shifter is compatible with standard handlebar diameters when using the clamp mount version.
Care: Keep the shifter clean from dirt and debris, especially around the lever mechanism. Periodically check and clean the shifter cable and housing. Light lubrication of the pivot points and cable entry can help maintain smooth operation. Use a damp cloth to wipe down the exterior; avoid harsh solvents that could damage the plastic components or finishes.
