Burford Floor Lamp - Black

The lamp uses three E27 GLS bulbs, with a maximum wattage of 60W per bulb.

Yes, the lamp has an IP44 rating, making it suitable for outdoor environments where it is protected against splashing water and solid objects larger than 1mm.

Yes, the bulbs are not included with the lamp and must be purchased separately.

Yes, you can use LED bulbs, especially LED filament bulbs, to achieve an authentic look. Ensure they are E27 base and do not exceed the 60W maximum per bulb if the lamp is not dimmed.

Yes, the Burford Floor Lamp is dimmable. You will need a compatible dimmer switch and dimmable bulbs for this feature to work.

The lamp has a Width of 640mm, Depth of 640mm, and a Height of 2300mm.

The lamp is constructed from die-cast aluminium alloy and glass.

Check that the power supply is on and the circuit breaker has not tripped. Ensure the E27 bulbs are correctly installed and not burnt out. Verify all wiring connections are secure (consult a qualified electrician if unsure).

This could be due to a loose bulb, an incompatible or faulty dimmer switch, or an unstable power supply. Try tightening the bulbs or replacing them. If using a dimmer, ensure it is compatible with the installed bulbs.

Although rated IP44, persistent water ingress might indicate a seal failure. Inspect the seals around the glass and aluminium panels. If damage is found, professional repair or replacement may be necessary.

Check if the lamp is set to a lower dimming level. If not, one or more bulbs may be nearing the end of their lifespan or are not the correct wattage. Ensure all three bulbs are functioning correctly and are of the appropriate specification.