Best current price£15.95from RS Components Ltd- UK
Shopping.co.uk recommended and popular offers
RS Components Ltd- UK£15.95Visit shop Eaton Brushed Aluminium M22 Push Button Enclosure - 1 Hole 22mm Diameter
Visit shop14 offers from £15.95 - £72.79
View price history by clicking the chart icon.
The Eaton M22-E1 mounting plate is designed for professionals integrating push buttons and signal lamps into electrical enclosures. Its primary benefit is providing a secure, IP65-rated mounting solution for standard 22mm components. A key consideration is its specific compatibility with the RMQ-Titan series and lack of SmartWire-DT support. This plate offers a robust 72x72mm aluminum base, finished in a neutral RAL 7035 grey, ensuring durability and a clean aesthetic in industrial environments.
| Model Part Number | 216541 |
|---|---|
| Brand | Eaton |
An IP65 rating means the enclosure is protected against dust ingress and protected against low-pressure water jets from any direction. It indicates a high level of protection suitable for many industrial environments.
While it has 22mm mounting holes, it is specifically designed and recommended for use with Eaton's RMQ-Titan series components for optimal compatibility and performance.
The product information does not specify included hardware. Typically, mounting hardware for the plate to the enclosure is separate and depends on the enclosure itself.
The plate itself has an IP65 rating, but its suitability for outdoor use depends heavily on the overall enclosure it is mounted within and the environmental conditions.
The 'E' number typically denotes the number of installation slots or holes for components. The M22-E1 is a single mounting plate, while models like M22-E5 and M22-E6 are panels designed to hold multiple components.
No, this mounting plate is not compatible with SmartWire-DT connectivity.
Verify that you are using a 22mm diameter component and that the mounting plate is correctly installed without obstructions in the 22mm hole.
Ensure the enclosure or panel has a compatible 72x72mm mounting area and that no modifications are required for the specific enclosure model.
Confirm that the mounted component has its own sealing mechanism and that the mounting plate is used within a suitable enclosure to achieve the desired IP65 rating.
Setup: The M22-E1 is designed for direct mounting into compatible Eaton enclosures or custom panels. Ensure the enclosure or panel has a pre-drilled 72x72mm area suitable for the plate, with the correct 22mm diameter hole for the component. Secure the mounting plate firmly using appropriate fasteners (not included). Then, install your chosen 22mm push buttons or signal lamps into the designated holes.
Compatibility: This mounting plate is specifically designed for use with Eaton's RMQ-Titan series components. It features 22mm diameter mounting holes. It is *not* compatible with SmartWire-DT systems.
Care: Clean the mounting plate with a soft, damp cloth. Avoid abrasive cleaners or solvents, which could damage the anodized finish. Ensure the plate remains free of debris, especially around the mounting holes, to maintain a proper seal when components are installed.
