Jarder Hot Tub And Pool Algae Remover - 5L

The weekly maintenance dose of 5ml per 1000L should be added every week to prevent algae regrowth and maintain water clarity.

Yes, Jarder Hot Tub and Pool Algae Remover is suitable for use in indoor hot tubs, whirlpools, and spas.

While not explicitly stated, like most chemical treatments, it is best stored in a cool, dark place and should remain effective for at least one to two years if kept sealed.

This product is designed to work alongside standard sanitizers. It is always recommended to maintain appropriate sanitizer levels as per your pool or hot tub manufacturer's guidelines.

While effective against algae, it is a chemical treatment. It's best to prevent pets from drinking treated water. Consult the product's safety data sheet for specific handling and safety information.

A 5L bottle provides enough for hundreds of treatments, depending on whether you are performing initial or maintenance doses. For example, 100 initial treatments (10ml/1000L) or 200 maintenance treatments (5ml/1000L) for a 1000L water volume.

If you suspect you have added too much, dilute the water by adding fresh water and running the filtration system. Monitor water parameters closely.

Ensure the correct dosage was added. Check water temperature and pH levels, as these can affect performance. Re-apply the initial treatment dose if necessary, ensuring water circulation.

Increase the frequency of the weekly maintenance dose or slightly increase the amount. Ensure filters are clean and circulating water adequately. Check for any external sources of contamination.

This is generally normal for this product. Ensure it has not expired and has been stored correctly. If significantly altered, contact the manufacturer.

This may not be directly related to the algae remover. Check water balance (pH, chlorine/sanitizer levels). Ensure the correct dosage was used and no other chemicals were mixed improperly.