Belling Gas Hob - Silver

Turn the control knob to the desired burner and push it in while turning. This will activate the electronic ignition. Hold the knob in for a few seconds after the flame lights to ensure it stays lit.

The hob uses gas. It is important to confirm that the hob is compatible with your gas type.

Wipe the surface with a damp cloth and mild detergent after it has cooled down. Avoid using abrasive cleaners.

Check the gas supply, clean the burner ports, and ensure the burner cap is correctly positioned. Ensure electrical supply is connected.

The wok burner is designed for high-heat cooking, ideal for stir-fries and searing.

The pan supports are made from cast iron.

Yes, the hob has a flame failure device that automatically cuts off the gas if the flame extinguishes.

The controls are located on the front of the hob for easy access.

Check the gas supply and ensure the burner caps are correctly positioned. Clean the burner ports if blocked. Ensure electrical supply is connected for ignition.

Clean the burner ports with a small needle or wire. Ensure the burner cap is correctly placed. Check gas pressure.

Check the electrical connection and ensure there is power. Replace the ignition electrode if needed.

Ensure the hob is level. Check that the pan supports are correctly in place and not damaged.