Wet & Forget Rapid Application Algae, Lichen & Mould Remover - 1.4L Bottle

Results typically appear within days but can take weeks or even months to become fully visible, depending on the severity of the growth and weather conditions. The product works gradually with rain and natural weathering.

No, the 'spray and walk away' system means no rinsing or scrubbing is required. The rain and natural elements will do the work over time.

Yes, Wet & Forget Rapid Application can be used on wooden decks. Ensure even coverage and allow it to work naturally.

Light rain shortly after application is generally not a problem and can even help the product to start working. Heavy downpours immediately after may dilute the solution, but usually, it will still be effective.

Keep pets and children away from the treated area until it is completely dry. While the product is designed for outdoor surfaces, overspray can harm plants. Rinse any overspray from plants immediately with water.

The 1.4L bottle is designed to cover approximately 20 square meters when used with the Rapid Application hose-end nozzle, providing consistent dilution.

Avoid applying in freezing temperatures. The product works best when temperatures are moderate and there is no risk of frost.

Ensure the hose is securely attached and the water is turned on. Check the nozzle for any blockages and clean if necessary. Verify that the bottle is correctly seated in the nozzle.

Patience is key, as results appear over time with natural weathering. Ensure the solution was applied evenly and the surface has not been rinsed or scrubbed afterward. For very stubborn stains, a second application may be beneficial after several weeks.

Test on an inconspicuous area first. Avoid applying during extreme heat or frost. If damage occurs, discontinue use and rinse the area thoroughly with water.