Kenable Ethernet Cable - Cat6a

Cat6a (Category 6a) is an Ethernet cable standard designed to support 10 Gigabit Ethernet speeds up to 100 meters (328 feet) and offers improved performance over Cat6, especially regarding crosstalk and alien crosstalk, making it suitable for higher frequency applications.

S/FTP stands for Screened Foiled Twisted Pair. It means each individual pair of wires is shielded (foiled), and the entire bundle of pairs is also screened with a braid or foil. This provides maximum protection against electromagnetic interference (EMI) and alien crosstalk.

LSZH stands for Low Smoke Zero Halogen. Cables with LSZH jackets emit very little smoke and no toxic halogens (like chlorine) when burned. This is a critical safety feature for use in enclosed public spaces, schools, government buildings, and other areas where fire safety regulations are strict.

Yes, you can use it for a standard home network. It is backward compatible with older Ethernet standards like Cat5e and Cat6. However, its advanced shielding and 10 Gigabit Ethernet capability are typically more beneficial in high-EMI environments or for high-performance network setups.

Stranded cables (like this one) are made of multiple thin strands of wire and are more flexible, making them ideal for patch cables that are moved or bent frequently. Solid core cables are made of a single solid wire and are generally used for in-wall installations as they offer better performance over longer distances but are less flexible.

The snagless design with winged boots covers the RJ45 connector's retaining clip. This prevents the clip from catching on other cables, racks, or surfaces when pulling the cable, which can otherwise lead to the clip breaking off.

AWG stands for American Wire Gauge. A lower AWG number indicates a thicker wire. This cable has a 26 AWG size, which is a common and suitable gauge for Cat6a patch cables, providing a good balance of conductivity and flexibility.

Ensure both ends of the cable are securely plugged into the RJ45 ports. Check if the cable is damaged. Test with a different, known-good Ethernet cable to rule out the cable as the issue. Verify network device configurations.

Confirm that both connected devices and network infrastructure support 10 Gigabit Ethernet. Check if the cable is physically damaged or severely kinked. Ensure the cable is fully seated in the ports. Test speeds with a shorter or different cable to compare.

The snagless design with winged boots is intended for protection. Gently push down on the boot near the clip to release it. Avoid excessive force.