B2c Camlock Layflat Hose Coupling Fitting - Type Dc - Blank Cap - 2"

Type DC refers to a 'Dry Disconnect' style coupler, and 'Blank Cap' means this fitting is designed to seal off the end of a hose line, acting as a protective cap.

These fittings are designed for moderate pressures typical of layflat hose applications. They are not recommended for extremely high-pressure systems or steam.

This fitting uses British Standard Pipe (BSP) threads.

Ensure the cam arms are fully engaged and locked, and that the internal seal or gasket is clean and in good condition. Proper alignment is crucial.

Polypropylene offers good resistance to many chemicals, but it's essential to verify compatibility with the specific substance being transferred to prevent degradation of the fitting.

Regular visual inspection for damage, cleaning with mild soap and water, and ensuring seals are in good condition are the primary maintenance steps.

While specific temperature limits depend on the fluid and pressure, polypropylene generally performs well in moderate temperature ranges. Avoid extreme heat or freezing conditions.

Ensure the cam arms are fully engaged and locked. Check the gasket/seal for damage or debris. Verify that the mating camlock ends are clean and properly aligned.

Check for dirt or obstructions in the cam grooves or on the adapter. Ensure both fittings are clean. Do not force the connection; re-align and try again.

Inspect the cam arms for bending or damage. Ensure the adapter is fully inserted into the coupler before attempting to lock the arms. Check for worn-out components.