The Tormek DBS-22 Drill Bit Sharpening Attachment is designed to precisely sharpen drill bits on y...The Tormek DBS-22 Drill Bit Sharpening Attachment is designed to precisely sharpen drill bits on your Tormek Water Cooled Sharpening System. It creates a 4-facet point, offering ideal cutting performance and efficiency. This attachment can restore worn or broken drills to a perfect shape, sharpening bits from 3mm (1/8") to 22mm (7/8"). The holder and guides are built with high precision, and the water cooling system ensures the steel is treated gently. The 4-facet point reduces heat buildup, significantly extending the drill bit's service life, with tests showing it lasts over four times longer than conventional drill bits. It allows for adjustable point angles between 90 and 150 degrees, and clearance angles of 7, 9, 11, or 14 degrees, catering to specific drilling requirements and materials.
The Tormek DBS-22 Drill Bit Sharpening Attachment is designed for both professionals and hobbyists looking to extend the life and improve the performance of their drill bits. This attachment allows users to restore worn or broken drill bits to a perfect 4-facet point, significantly increasing their lifespan and cutting efficiency. Keep in mind that while the system is highly effective, it requires some initial setup and practice to achieve optimal results.
All features
Model Part Number
DBS22
Brand
Tormek
Extended Product Information
FAQs
What drill bit sizes can the DBS-22 sharpen?
The DBS-22 sharpens drill bits from 3mm (1/8") to 22mm (7/8").
What is the benefit of the 4-facet point?
The 4-facet point provides ideal cutting performance and efficiency, and it reduces heat buildup, which extends the drill bit's service life.
Can I use the DBS-22 with other sharpening systems?
No, the DBS-22 is specifically designed for use with the Tormek Water Cooled Sharpening System.
How do I adjust the point and clearance angles?
The attachment has adjustable guides and scales. Refer to the manual for specific angle recommendations based on drill bit size and material.
How often should I clean the grinding wheel?
Clean the grinding wheel periodically, depending on usage. Use a stone grader to expose fresh abrasive.
What materials can I sharpen drill bits for?
You can sharpen drill bits for various materials, including wood and metal. Adjust the angles accordingly.
How do I maintain the water cooling system?
Regularly check the water level and replace the water in the trough as needed to ensure effective cooling. Clean the trough to remove any debris.
Troubleshooting
Drill bit not sharpening evenly.
Check the alignment of the DBS-22 attachment and the drill bit in the holder. Ensure the angles are correctly set. Inspect the grinding wheel for wear or unevenness.
Drill bit overheating during sharpening.
Make sure the water cooling system is functioning properly. Reduce the pressure applied when feeding the drill bit against the grinding wheel. Allow the drill bit to cool periodically.
Poor drilling performance after sharpening.
Re-check the point and clearance angles. Ensure the drill bit is properly seated and the cutting edges are sharp.
Pros and Cons
Pros
Significantly extends drill bit life.
Improves cutting performance and efficiency.
Allows for precise sharpening angles.
Water cooling prevents overheating.
Suitable for a wide range of drill bit sizes.
Easy to use with practice.
Cons
Requires initial setup and familiarization.
The cost of the attachment is a consideration.
Requires a Tormek sharpening system (sold separately).
Sharpening process takes more time compared to other methods.
May not be suitable for extremely damaged drill bits.
Setup, Compatibility & Care
Compatibility: The DBS-22 is designed to be used with the Tormek Water Cooled Sharpening System. Ensure you have a compatible Tormek machine.
Assembly: Attach the DBS-22 to the Tormek machine following the manufacturer's instructions. This typically involves securing the attachment to the universal support.
Adjusting Angles: Set the point and clearance angles based on the drill bit size and material using the provided guides and scales. Refer to the manual for specific angle recommendations.
Sharpening Process: Carefully insert the drill bit into the holder, making sure it is properly seated. Start the Tormek machine and slowly feed the drill bit against the grinding wheel. The water cooling system will prevent overheating.
Care: Regularly clean the attachment and the Tormek machine. Keep the grinding wheel clean and replace the water in the cooling trough as needed. Always follow safety precautions when using the Tormek system.