connektgear RJ45 Network Cable - CAT6

Cat6 cables offer higher performance than Cat5e, supporting higher frequencies (up to 250 MHz) and faster data rates (up to 10 Gbps over shorter distances, typically 1000Base-T up to 100 meters). They often have stricter specifications for crosstalk and system noise.

Yes, Cat6 cables are backward compatible with Cat5e. However, the network speed will be limited to the capabilities of the Cat5e device or network infrastructure.

U/UTP stands for Unshielded Twisted Pair. It means the cable consists of twisted pairs of wires without any additional metallic foil or braid shielding around the pairs or the overall cable. This is standard for most home and office patch cables.

LSZH stands for Low Smoke Zero Halogen. Cables with this jacket material are designed to emit less smoke and no toxic halogens (like chlorine) when exposed to fire, making them safer for indoor installations, especially in public spaces.

The connektgear 31-0100O is 10 meters (approximately 33 feet) in length.

The snagless boot protects the RJ45 connector's retaining clip from breaking during insertion or removal, and it prevents the cable from snagging on other cables or obstacles, making installation easier and prolonging the life of the connector.

Verify both ends of the cable are securely plugged into the correct ports. Check that the connected devices are powered on and configured for network use. Try a different known-good cable to rule out a faulty cable.

Ensure the cable is fully seated in the ports. Check if the cable is damaged (kinks, cuts). Confirm that the network devices and your internet plan support higher speeds. The cable itself is rated for Gigabit speeds, so the bottleneck may be elsewhere in the network.

Inspect the cable for any signs of physical damage. Ensure the cable is not routed near sources of strong electromagnetic interference (e.g., power cables, microwaves). Make sure the snagless boot is not preventing the connector from fully engaging.