Dulux Trade Quick Dry Undercoat - White

It is suitable for interior wood and metal surfaces.

The surface should be clean, dry, and free from contaminants. Lightly sand the surface to provide a key for the undercoat.

Apply one or two coats, depending on the surface and the desired finish.

Allow a minimum of 4 hours, and a maximum of 5 hours, between coats.

While it is designed for use with Dulux Trade Quick Dry Gloss, it may be compatible with other water-based topcoats. Always test a small area first.

Clean brushes, rollers, and other equipment immediately after use with water.

It will cover approximately 10 m² per litre.

Store in a cool, dry place and protect from frost and extreme temperatures.

Ensure the surface is clean, dry, and lightly sanded. Remove any loose paint or contaminants. Consider using a primer if the surface is particularly difficult to adhere to.

Ensure the undercoat is thoroughly stirred before application. Apply an even coat, avoiding excessive thickness. Use a high-quality brush or roller.

Check the temperature and humidity. Allow for adequate ventilation. Ensure the undercoat is not applied too thickly.

This may indicate insufficient surface preparation. Ensure the surface is thoroughly cleaned and sanded before application. Allow adequate drying time between coats.