Faithfull Grout Trowel - Soft Grip Handle - 4 x 12in

The primary purpose is to effectively apply and finish tile grout, especially in the joints, while minimizing the risk of scratching delicate tile surfaces.

No, this trowel is designed for finishing and applying grout, not for aggressive removal of old grout or adhesive. A dedicated grout rake or scraper would be more suitable for removal tasks.

The rubber face is permanently mounted on the hard rubber pad and rigid backing. If the face becomes significantly damaged or worn, the entire trowel may need replacement.

The less abrasive surface prevents fine scratches and marks on delicate tile materials such as polished porcelain, natural stone, and marble, which can easily be damaged by standard metal trowels or aggressive sponges.

The trowel measures 100 x 300mm (4 x 12 inches).

Yes, it is suitable for both standard cementitious grouts and epoxy-based grouts.

After each use, clean the rubber face thoroughly with water to remove all grout residue. Allow it to air dry completely before storing.

Ensure the grout is mixed to the correct consistency. Check that the rubber face of the trowel is clean and free from hardened grout.

Wipe the trowel more frequently during use. Ensure you are holding the trowel at an appropriate angle to the grout line and tile surface.

Ensure you are using the correct grip. The soft-grip handle is designed for comfort, but prolonged use may still cause fatigue. Take regular breaks.