Best current price£0.98from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£0.98Visit shop Timco Yellow 10100Nffp Nylon Frame Fixings - Pz - 10.0 X 100 Timpac 3
Visit shop
B&Q£5.08Visit shop B&Q - Nylon Frame Fixings10.0 X 100
Visit shop6 offers from £0.98 - £7.50
View price history by clicking the chart icon.
The TIMco Nylon Frame Fixings are the ideal choice for tradespeople and DIY enthusiasts needing a reliable way to anchor frameworks to solid masonry substrates like concrete, brick, and stone. They provide a secure, vibration-resistant hold thanks to their specialized anti-rotation lugs, though users should note they are intended strictly for dry, low-humidity indoor environments due to their standard zinc finish.
| Colour | Yellow |
|---|---|
| Model Part Number | 10100NFFP |
| Brand | TIMco |
You should use a 10mm masonry drill bit for these fixings.
No, these fixings have a zinc finish and are designed for clean, dry, and low-humidity indoor environments.
These fixings can accommodate fixtures up to 50mm thick.
You need a PZ3 (PoziDrive 3) driver bit.
They are suitable for solid substrates including brick, block, stone, and concrete.
The pack contains three complete fixing units.
The hole may be too wide or the material is too soft. Ensure you are using a sharp 10mm masonry bit and avoid over-drilling the diameter.
Check that the hole is deep enough to accommodate the full 100mm length of the fixing. Remove any trapped dust or masonry debris from the hole.
To achieve the best results, use a 10mm masonry drill bit to create the pilot hole to a depth slightly deeper than the 100mm plug length. Ensure all dust and debris are cleared from the hole before insertion. The fixings are designed for dry indoor use; using them in damp or exterior settings may lead to corrosion of the zinc-plated screw. When installing, drive the screw with a PZ3 bit until the head is flush against the fixture, being careful not to over-torque if using a high-powered impact driver.
