Lindy Fibre Optic Patch Cable - OM2 - 2m LC-ST

OM2 (Optical Multimode 2) fiber is a type of multimode fiber optic cable optimized for 850nm and 1300nm wavelengths. It typically supports 10 Gigabit Ethernet up to 82 meters and 1 Gigabit Ethernet up to 550 meters. It is suitable for shorter to medium-length runs within buildings or data centers but is not designed for very long-haul telecommunications compared to single-mode fiber.

No, this is a multimode fiber optic cable. It is not compatible with single-mode fiber equipment, which uses different core sizes and light transmission methods. Using it with single-mode equipment will result in no connection or severe signal degradation.

Full duplex means the cable can transmit and receive data simultaneously. This doubles the potential effective bandwidth compared to half-duplex communication, leading to more efficient network performance.

Ceramic (often Zirconia) is used for the connector ferrule because it is a very hard, durable material that can be manufactured to extremely tight tolerances. This precision ensures optimal alignment between fibers, minimizing signal loss (insertion loss) and maximizing reliability and connection longevity.

LS0H stands for Low Smoke Zero Halogen. This means the cable's outer jacket is made from materials that produce very little smoke and do not emit halogenated gases (like chlorine or bromine) when burned. This is a safety feature important in enclosed spaces, such as data centers or public buildings, to improve visibility and reduce toxic fumes during a fire.

Use a specialized fiber optic cleaning tool or a lint-free wipe with an approved fiber optic cleaning solution. Gently wipe the ferrule end-face. Avoid touching the polished end-face with your fingers. Ensure the connector is completely dry before re-inserting.

This Lindy fiber optic patch cable comes with a 10-year manufacturer's warranty.

Check that both LC and ST connectors are fully seated in their respective ports. Clean the fiber ferrules at both ends using a proper fiber optic cleaning kit. Verify that the connected devices are configured for multimode fiber and are functioning correctly.

Ensure the connected devices and network infrastructure support the expected speeds. Confirm that the cable is fully functional and not damaged. Check for any other network bottlenecks. For OM2 fiber, verify that the transmission distance does not exceed its optimal range.

Inspect the connector and port for any debris or physical damage. Ensure the connector key is properly aligned with the port's slot. Do not force the connection; it should slide in smoothly.